Genuine PoulanR or Poulan PROR bar and chain oil is recommended to protect your unit against excessive wear from heat and fric- tion. PoulanR or Poulan PROR oil resists high temperaturethinning. If PoulanR or Pou- lan PROR bar and chain oil is not available, use a good grade SAE 30 oil.

S Never use waste oil for bar and chain lubrication.

S Always stop the engine before removing the oil cap.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during stor- age. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before stor- age for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

See the STORAGE section for additional in- formation.

HOW TO STOP YOUR UNIT

S To stop the engine, move the ON/OFF switch to the OFF position.

SIf engine does not stop, move choke lever to the FULL CHOKE position.

ON/OFF Switch

HOW TO START YOUR UNIT

WARNING: Make sure the chain will not make contact with any object while start- ing the engine. Never try to start the unit when the guide bar is in a cut. Avoid any contact with the muffler. A hot muffler can cause seri- ous burns.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

Starter Handle

Choke

Lever

Primer Bulb

Muffler

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move choke lever to FULL CHOKE by aligning lever with position shown on de- cal (see illustration below).

Choke position decal

5.Squeeze the throttle trigger fully and hold through all remaining steps.

6.Pull starter rope handle sharply until en- gine sounds as if it is trying to start, but do not pull rope more than 6 times.

7.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE by aligning lever with position shown on decal (see illustration below).

Choke position decal

8.Pull starter rope sharply until engine runs, but no more than 6 pulls. If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 pulls. If the engine doesn’t start, repeat procedure 2 additional times.

NOTE: If engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

9.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to OFF CHOKE by aligning lever with position shown on decal (see illustration below). Al- low the unit to run for 30 more seconds at OFF CHOKE before releasing the throttle trigger.

10

Page 9 Page 11
Page 10
Image 10
Poulan 530164083 HOW to Stop Your Unit, HOW to Start Your Unit, See the Storage section for additional in- formation
Page 9 Page 11

PP446, 530164083 specifications

The Poulan PP446,530164083 is a versatile and efficient outdoor power tool that caters to various user needs in lawn and garden maintenance. With its robust design and advanced features, it serves as an excellent choice for both professional landscapers and homeowners looking to maintain their green spaces effectively.

One of the main attractions of the Poulan PP446 is its lightweight construction, making it easy to handle and maneuver while working in diverse landscapes. Weighing approximately 12 pounds, it reduces user fatigue, allowing for extended periods of use without discomfort. This is particularly beneficial when performing tasks such as trimming bushes or hedges where precision and control are vital.

The PP446 features a powerful engine designed to deliver ample power while ensuring efficiency. The engine is environmentally friendly, equipped with a low-emission technology that meets strict EPA standards. This not only promotes eco-friendliness but also offers users peace of mind when using the tool, knowing they are contributing to a cleaner environment.

Enhanced user experience comes from the ergonomic handle design, which provides a comfortable grip during operation. The vibration-dampening technology incorporated into the handle helps to reduce fatigue, making it suitable for prolonged use. This design consideration is crucial for those engaging in intensive tasks or those who may have concerns about strain and discomfort.

The Poulan PP446 also showcases easy-start technology, which simplifies initiation even in cold weather conditions. This user-friendly feature minimizes the hassle often associated with starting outdoor power equipment, allowing users to get to work quickly and efficiently without unnecessary delays.

In terms of maintenance, the PP446 is designed for convenience, featuring easy-access air filters and fuel tanks that simplify the upkeep process. This means less time spent on maintenance and more time focused on the tasks at hand. Additionally, the tool's high-quality materials contribute to its durability, ensuring it withstands the rigors of regular use.

Overall, the Poulan PP446,530164083 combines efficiency, durability, and user-friendly features to create a reliable tool for lawn care and landscaping. Its technology-driven design, coupled with a commitment to environmental sustainability, makes it a standout choice for those seeking to enhance their outdoor spaces with ease. Whether you need a dependable tool for occasional trimming or regular maintenance, the PP446 rises to the occasion, ensuring beautiful results in any garden or yard.
Top Page Image Contents