Replace guide bar when the groove is worn, the guide bar is bent or cracked, or when exce-

ssheating or burring of the rails occurs. If re- placement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw.

CHAIN SHARPENING

Chain sharpening is a complicated task that requires special tools. We recommended you refer chain sharpening to a professional chain sharpener.

IGNITION TIMING

Ignition timing is fixed and nonadjustable.

SPARK PLUG

The spark plug should be replaced each year to ensure the engine starts easier and runs better.

1.Loosen 3 screws on cylinder cover.

2.Remove the cylinder cover.

3.Pull off the spark plug boot.

4.Remove spark plug from cylinder and dis- card.

5.Replace with Champion RCJ--7Y spark plug and tighten securely with a 3/4 inch socket wrench. Spark plug gap should be 0.025 inches.

6.Reinstall the spark plug boot.

7.Reinstall the cylinder cover and 3 screws. Tighten securely.

Screws

Cylinder

Spark

Cover

 

Plug Boot

 

Spark

 

Plug

 

STORAGE

WARNING: Stop engine and allow to cool, and secure the unit before storing or transporting in a vehicle. Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. Storeunit with all guards in place. Position so that any sharp object cannot accidentally cause injury to passersby. Store the unit out of reach of children.

SBefore storing, drain all fuel from the unit.

Start engine and allow to run until it stops.

SClean the unit before storing. Pay particu- lar attention to the air intake area, keeping it free of debris. Use a mild detergent and sponge to clean the plastic surfaces.

SDo not store the unit or fuel in a closed area where fuel vapors can reach sparks or an openflame from hot water heaters, electric motors or switches, furnaces, etc.

SStore in a dry area out of the reach of chil- dren.

CAUTION: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, fuel hose, or fuel tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to fuel mixture separation and formation of acids during storage. Acidic gas can damage the engine.

NEED ASSISTANCE?

Call 1--800--554--6723.

NEED SERVICE PART?

Contact your authorized service dealer.

15

Page 14 Page 16
Page 15
Image 15
Poulan 2004-01, 530164806 Chain Sharpening, Ignition Timing, Spark Plug, Need ASSISTANCE?, Need Service PART?
Page 14 Page 16

2004-01, 530164806 specifications

The Poulan 530164806 is a key component in the realm of outdoor power equipment, tailored for those who seek quality and reliability in their gardening and landscaping tasks. Released as part of Poulan's commitment to delivering effective tools, this product stands out for its unique blend of durability and functionality, making it a staple for both amateur gardeners and professional landscapers.

One of the principal features of the Poulan 530164806 is its robust design. Built with high-quality materials, this tool is constructed to withstand the rigors of frequent use in various environments. Its lightweight frame allows users to operate it without excessive strain, while still ensuring it can handle tough tasks like trimming and cutting with ease.

The technology behind the Poulan 530164806 is impressive. It is equipped with advanced engine specifications that provide excellent power-to-weight ratio. This means that while it is easy to handle, it does not compromise on performance. The engine is designed for efficient fuel consumption, which not only saves money in the long run but also promotes environmental responsibility. The tool's low emissions are an added benefit, aligning with modern standards for sustainability in outdoor equipment.

Another notable characteristic of the Poulan 530164806 is its ergonomic design. The handle is crafted to ensure a comfortable grip, reducing user fatigue during extended operations. The design allows for easy maneuverability, which is especially useful for intricate landscaping tasks where precision is key. The intuitive controls provide straightforward operation, making it accessible even for those new to outdoor maintenance.

Maintenance of the Poulan 530164806 is hassle-free, with components that are designed for easy access and replacement, ensuring that the tool remains in peak condition. Its durability means fewer repairs and a longer lifespan, enabling users to focus more on their gardening rather than worrying about equipment failure.

In conclusion, the Poulan 530164806 embodies the perfect balance of power, efficiency, and user-friendly design. It caters to a broad audience by merging innovative technologies with traditional performance expectations. Whether it's for homeowners looking to maintain their yards or professionals undertaking large landscaping projects, this tool stands out as a reliable companion in outdoor endeavors. With its commitment to quality, Poulan continues to be a trusted name in the gardening and landscaping community.
Top Page Image Contents