Shoulder Strap Assembly, Powerhead END | Poulan 530164830 manual

3.Secure the mounting bracket by tighten- ing the screws with the hex wrench.

4.Locate the decal on the handlebar. This decal includes an arrow. Position the handlebar with the mounting bracket at the end of the arrow.

5.Position the second bracket cover over the handlebar. Align the mounting brack- et and the bracket cover screw holes. Again make sure the handlebar is at the end of the arrow.

6.Insert two screws and hand tighten only. Be sure the handlebar is installed cor- rectly; then, tighten each screw securely with the hex wrench.

SHOULDER STRAP ASSEMBLY

WARNING: Proper shoulder strap and handlebar adjustments must be made with the engine completely stopped before us- ing unit. The shoulder strap clamp must be installed as shown above the handlebar on the upper shaft (powerhead end of unit).

NOTE: The lower shoulder strap clamp has two spacer tabs attached. These tabs are pro- vided to adapt this attachment for use with powerheads that have a 1″ diameter upper shaft (the shoulder strap clamp will not tighten down securely on the 1″ diameter upper shaft without using these spacer tabs). The tabs must be broken off completely before use and placed over the screw holes on the lower shoulder strap clamp. These tabs are not needed for powerheads with a 7/8″ upper shaft.

LOWER SHOULDER STRAP CLAMP

Spacer Tabs

Upper Shoulder

Strap Clamp

POWERHEAD

END

	Lower Shoulder	ATTACHMENT
		END
	Strap Clamp
		Screws

3.Insert two screws into the screw holes.

4.Secure shoulder strap clamp by tighten- ing screws with the hex wrench.

5.Insert your right arm and head through the shoulder strap and allow it to rest on your left shoulder. Make sure the danger sign is on your back and the hook is to the

right side of your waist.

NOTE: A one-half twist is built in the shoulder strap to allow the strap to rest flat on the shoul- der.

6.Adjust the strap, allowing the hook to be about 6 inches below the waist.

7.Fasten the strap hook to the clamp and lift the tool to the operating position.

8.Try on shoulder strap and adjust for fit and balance before starting the engine or

beginning a cutting operation.

NOTE: It may be necessary to relocate the shoulder strap clamp on the shaft for proper balancing of unit.

HARNESS

ADJUSTMENT

FOR BALANCE

Spacer Tabs positioned for use on 1″ diameter upper shaft

1.Place the upper shoulder strap clamp over the upper shaft above the handlebar.

2.Position the lower shoulder strap clamp under the upper shaft and align the upper and lower clamp screw holes (use spacer tabs between upper and lower clamps if necessary to secure clamp, i.e. for 1″ diameter upper shaft).

6inches (15 cm) below waist

	4 -- 12
		inches
	(10 -- 30 cm)
30 inches		above
30 inches		ground
(76 cm)		ground
(76 cm)

30inches

(76 cm)

530164830 specifications

The Poulan 530164830 is a versatile and powerful chainsaw designed for a variety of cutting tasks, making it an ideal choice for both homeowners and professional landscapers. Known for its reliability and performance, this model incorporates several innovative features, technologies, and characteristics that set it apart in the market.

One of the standout features of the Poulan 530164830 is its potent 40cc gas engine, which strikes an excellent balance between power and weight. This engine allows for efficient cutting of branches, logs, and other materials, while still being manageable for extended use. The chainsaw's 16-inch cutting bar provides a generous reach, enabling users to make deeper cuts without having to struggle with maneuverability.

Safety is a critical aspect of chainsaw design, and the Poulan 530164830 comes equipped with several safety features. It features a chain brake that immediately stops the chain in case of kickback, minimizing the risk of accidents. Additionally, the chainsaw has an inertia-activated brake system that adds an extra layer of protection during operation.

Another important characteristic of this chainsaw is its user-friendly design. The automatic oiling system ensures that the chain is consistently lubricated, reducing wear and tear while allowing for smooth operation. This feature saves time and effort, as users don’t have to manually apply oil before or during use. The chainsaw also includes an easy-access air filter and spark plug, which simplifies maintenance and contributes to overall longevity.

The Poulan 530164830 goes a step further by incorporating advanced technologies for easier starting and operation. The spring-assist starter mechanism reduces the resistance needed to pull the starter rope, making it easier to start the engine, even in cold conditions.

In terms of ergonomics, the chainsaw is designed with a lightweight body and an anti-vibration system, which helps reduce fatigue during prolonged use. The textured grip on the handle offers users added comfort and control, ensuring a more precise cutting experience.

In summary, the Poulan 530164830 chainsaw is a powerful tool that seamlessly combines strength, safety, and user-friendly features. With its robust engine, safety mechanisms, automatic oiling system, and ergonomic design, this chainsaw is suitable for a wide range of cutting applications, making it a reliable choice for anyone looking to tackle outdoor projects effectively.

Poulan 530164830 instruction manual Shoulder Strap Assembly, Powerhead END

Models: 530164830