To Move Forward and Backward See Fig | Poulan 532 43 85-70 manual

OPERATION

TO MOVE FORWARD AND BACKWARD (See Fig. 7)

The direction and speed of movement is controlled by the forward and reverse drive pedals.

•Start tractor and release parking brake.

•Slowly depress forward (K) or reverse (L) drive pedal to begin movement. Ground speed increases the further down the pedal is depressed.

TO USE CRUISE CONTROL (J) (See Fig. 7)

The cruise control feature can be used for forward travel only.

Fig. 7

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

•With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 8)

The position of the attachment lift lever (A) determines the cutting height.

Fig. 8

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 9)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

•Adjustmowertodesiredcuttingheight(See“TOADJUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

Fig. 9

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitat- ing or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut with attachment lift lever.

•Start mower blades by engaging attachment clutch control.

96042012500, 532 43 85-70 specifications

The Poulan 532 43 85-70,96042012500 is a powerful and reliable equipment designed for garden maintenance and landscaping tasks. Known for its robust construction and efficient performance, this model caters to both professional landscapers and home gardeners looking for efficiency and ease of use.

One of the key features of the Poulan 532 43 85-70,96042012500 is its powerful engine. Packed with a high-performance motor, it delivers ample power for various tasks, including mowing, trimming, and edging. The engine is designed for fuel efficiency, allowing users to complete their gardening tasks with minimal downtime for refueling. This efficiency makes it an ideal choice for those who have large lawns or gardens that require regular maintenance.

The cutting system is another remarkable aspect of this model. Equipped with a sharp, durable blade, the Poulan ensures a clean and precise cut on grass and vegetation. The adjustable cutting height feature is particularly beneficial for users who desire versatility, allowing them to easily change the blade height to accommodate different types of grass and terrain.

User comfort is also a priority in the design of the Poulan 532 43 85-70,96042012500. The ergonomic grip and lightweight structure enable easy maneuverability, ensuring that operators do not experience fatigue even during extended use. The user-friendly controls ensure that even beginners can operate the equipment without difficulty.

The durability of the Poulan is enhanced by its weather-resistant materials, making it a desirable option for varying climates. Its sturdy frame ensures long-lasting performance, allowing users to rely on this tool for years without needing frequent repairs or replacements.

Additionally, the Poulan 532 43 85-70,96042012500 is designed with safety features to protect users during operation. The blade guard and automatic shut-off mechanisms help prevent accidents, making it a safe option for families and workplaces alike.

Overall, the Poulan 532 43 85-70,96042012500 stands out for its combination of power, efficiency, and user-friendly design. It is an excellent investment for anyone looking to achieve professional-quality results in their lawn maintenance and landscaping endeavors.

Poulan 532 43 85-70 manual To Move Forward and Backward See Fig, To USE Cruise Control J See Fig

Models: 96042012500 532 43 85-70