SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT (See Fig. 22)

The transaxle should be in neutral when the gear shift lever is in neutral (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

Make sure transaxle is in neutral.

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

Loosen adjustment bolt in front of the right rear wheel.

Position the gear shift lever in the neutral position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

 

NEUTRAL

GEARSHIFT LEVER

LOCK GATE

 

 

ADJUSTMENT

 

BOLT

Fig. 22

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 23)

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

Fig. 23

TO START ENGINE WITH A WEAK BATTERY (See Fig. 24)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

parts dealer. Tire sealant also prevents tire dry rot and corrosion.

Fig. 24

21

Page 21
Image 21
Poulan 96018000500, 532 43 88-96 Transaxle Gear Shift Lever Neutral Adjustment See Fig, To Adjust Steering Wheel Alignment

532 43 88-96, 96018000500 specifications

The Poulan 96018000500,532 43 88-96 is a versatile and powerful tool designed for various outdoor tasks, particularly for homeowners and landscaping professionals. This particular model stands out due to its robust performance and user-friendly features.

One of the notable characteristics of the Poulan 96018000500 is its powerful engine, which is engineered to deliver reliable performance for a range of applications. This engine not only provides sufficient power to handle tough cutting jobs but also ensures fuel efficiency, allowing users to complete their tasks without frequent refueling interruptions.

In addition to its engine, the Poulan 96018000500 incorporates advanced technology that enhances its usability. The tool features an intuitive starting mechanism that simplifies the ignition process, making it easier for users to start the machine with minimal effort. This is particularly beneficial for those who may not have extensive experience with outdoor equipment.

The design of the Poulan 96018000500 is also noteworthy. It features an ergonomic handle that provides a comfortable grip and reduces user fatigue during extended use. This is an important consideration for landscaping work, where operators may be required to use the tool for long periods. The lightweight construction of the equipment contributes to its maneuverability, allowing users to work efficiently in various terrains.

Durability is another key characteristic of the Poulan 96018000500. Constructed with high-quality materials, this tool is built to withstand harsh outdoor conditions and resist wear and tear. This reliability ensures that users can depend on their equipment for years without compromising performance.

Moreover, the Poulan 96018000500 is designed for versatility. It is compatible with a range of attachments, allowing users to convert it for different tasks such as trimming, edging, and blowing debris. This adaptability makes it an essential addition to any homeowner's toolkit or professional landscaper's arsenal.

In summary, the Poulan 96018000500,532 43 88-96 combines power, efficiency, and user-centric design, making it a standout choice for outdoor maintenance. With its advanced starting technology, ergonomic features, and durability, this tool meets the demands of both casual users and professionals alike. Whether tackling simple yard maintenance or more demanding landscaping tasks, the Poulan 96018000500 proves to be a reliable partner in enhancing outdoor spaces.