NOTE: If this saw is to be used for com- mercial logging, a chain brake is required and shall not be removed or otherwise dis- abled to comply with Federal OSHA Regula- tions for Commercial Logging.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arresting screen. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the spark arresting screen.

Failure to follow all Safety Rules and Precau- tions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer or call 1-800--554--6723.

STANDARDS: This saw is listed by Under- writer’s Laboratories, Inc., in accordance with:

ANSI B175.1-2000American National Standards for Gasoline--Powered Chain Saws -- Safety Requirements

CSA Z62.1-1995 Chain Saws -- Occupa- tional Health and Safety

CSA Z62.3-1996Chain Saw Kickback Oc- cupational Health and Safety

ASSEMBLY

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is properly assembled and all fasteners are secure. Al- ways wear gloves when handling the chain.

The chain is sharp and can cut you even when it is not moving!

1.Loosen and remove the chain brake nuts and the chain brake from the saw.

2.Remove the plastic shipping spacer (if present).

Location of shipping spacer

 

Chain Brake

Chain Brake

Nuts

 

 

Bar Tool

3.An adjusting pin and screw is used to ad- just the tension of the chain. It is very im- portant when assembling the bar, that the pin located on the adjusting screw aligns into a hole in the bar. Turning the screw will move the adjustment pin up and down the screw. Locate this adjustment before you begin mounting the bar onto the saw. See illustration below.

Inside view of

Chain Brake

Adjustment located on Chain Brake

4.Turn the adjusting screw by hand coun- terclockwise until the adjusting pin just touches the stop. This should allow the pin to be near the correct position.

5.Slide guide bar behind clutch drum until guide bar stops against clutch drum sprocket.

Mount the Bar

6.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

6

Page 5 Page 7
Page 6
Image 6
Poulan 545001484 instruction manual Assembly, Attaching the BAR & Chain If not, Chain Brake Nuts
Page 5 Page 7

545001484 specifications

The Poulan 545001484 is a powerful and efficient chainsaw designed for both professional and home use. Renowned for its robust performance, this model is ideal for pruning, cutting firewood, and tackling various outdoor projects. The chainsaw boasts a lightweight construction, enabling users to operate it for extended periods without experiencing excessive fatigue.

One of the standout features of the Poulan 545001484 is its reliable 50cc two-cycle engine. This high-performance engine provides ample power to cut through thick branches and logs, ensuring efficiency in various cutting tasks. The chainsaw's air injection system is another noteworthy technology that enhances its performance by keeping the air filter cleaner for longer, reducing downtime for maintenance. This means users can focus on their work, knowing they won’t have to clean or replace the filter frequently.

The design of the Poulan 545001484 incorporates a 18-inch bar and chain, striking a balance between agility and the ability to tackle larger cuts. This length allows for smooth cutting while still being manageable for users of various skill levels. Additionally, the chainsaw features an automatic oiler, ensuring that the bar and chain are properly lubricated during operation, which extends the life of both components and promotes cutting efficiency.

Safety is paramount in chainsaw design, and the Poulan 545001484 does not compromise in this area. It comes equipped with features such as a chain brake, which stops the chain immediately in case of kickback, enhancing user protection. The cushioned, ergonomic handle aids in reducing vibrations during use, further increasing comfort and control for the operator.

Easy maintenance is another appealing aspect of the Poulan 545001484. The tool-less chain tensioning system allows users to adjust the chain quickly and easily without needing additional tools, which is particularly beneficial during long cutting sessions. Overall, the Poulan 545001484 combines power, efficiency, and user-friendly design, making it a preferred option for anyone in need of a reliable and versatile chainsaw for various outdoor tasks. Its innovative features cater to experienced users while remaining accessible for novices, ensuring it stands out in a competitive market.
Top Page Image Contents