Opening of felling cut

SSqueeze the throttle trigger and allow the engine to reach full speed before

cutting.

SBegin cutting with the saw frame

against the log.

SKeep the engine at full speed the entire time you are cutting.

SAllow the chain to cut for you. Exert only light downward pressure. If you force the cut, damage to the bar, chain, or en- gine can result.

SRelease the throttle trigger as soon as the cut is completed, allowing the en- gine to idle. If you run the saw at full throttle without a cutting load, unneces- sary wear can occur to the chain, bar, and engine. It is recommended that

the engine not be operated for lon- ger than 30 seconds at full throttle.

STo avoid losing control when cut is com- plete, do not put pressure on saw at end

of cut.

S Stop the engine before setting the saw down after cutting.

TREE FELLING TECHNIQUES

WARNING: Check for broken or dead branches which can fall while cutting causing serious injury. Do not cut near build- ings or electrical wires if you do not know the direction of tree fall, nor cut at night since you will not be ale to see well, nor during bad weather such as rain, snow, or strong winds, etc. If the tree makes contact with any utility line, the utility company should be notified immediately.

SCarefully plan your sawing operation in ad- vance.

SClear the work area. You need a clear area all around the tree so you can have secure

footing.

SStudy the natural conditions that can cause the tree to fall in a particular direction.

Natural conditions that can cause a tree to fall in a particular direction include:

SThe wind direction and speed.

S The lean of the tree. The lean of a tree might not be apparent due to uneven or sloping terrain. Use a plumb or level to de- termine the direction of tree lean.

SWeight and branches on one side. S Surrounding trees and obstacles.

Look for decay and rot. If the trunk is rotted, it can snap and fall toward the operator. Check for broken or dead branches which can fall on you while cutting.

Make sure there is enough room for the tree to fall. Maintain a distance of 2-1/2tree lengths from the nearest person or other objects. En- gine noise can drown out a warning call.

Remove dirt, stones, loose bark, nails, staples, and wire from the tree where cuts are to be made.

Plan a clear retreat path to the rear and diag- onal to the line of fall.

Plan a clear retreat path

Direction of Fall

45_

FELLING LARGE TREES

(6 inches (15 cm) in diameter or larger) The notch method is used to fell large trees. A notch is cut on the side of the tree in the de- sired direction of fall. After a felling cut is made on the opposite side of tree, the tree will tend to fall into the notch.

NOTE: If the tree has large buttress roots, remove them before making the notch. If us- ing saw to remove buttress roots, keep saw chain from contacting ground to prevent dull- ing of the chain.

NOTCH CUT AND FELLING THE TREE

SMake notch cut by cutting the top of the notch first. Cut through 1/3 of the diameter of the tree. Next complete the notch by cut- ting the bottom of the notch. See illustra- tion. Once the notch is cut remove the notch of wood from the tree.

Final (felling) cut here, 2 inches (5 cm) above center of notch.

First cut

Notch

Second cut

Hinge

SAfter removing the cutout of wood, make the felling cut on the opposite side of the notch. This is done by making a cut about two inches (5 cm) higher than the center of the notch. This will leave enough uncut wood between the felling cut and the notch to form a hinge. This hinge will help pre- vent the tree from falling in the wrong direc- tion.

Hinge holds tree on stump and helps control fall

Closing of notch

11

Page 10 Page 12
Page 11
Image 11
Poulan 545123644 instruction manual Tree Felling Techniques, Felling Large Trees, Notch CUT and Felling the Tree
Page 10 Page 12

545123644 specifications

The Poulan 545123644 is a powerful chainsaw designed to meet the needs of homeowners and light commercial users. Known for its reliability and ease of use, this chainsaw has become a popular choice for those looking to tackle various cutting tasks efficiently. With a focus on performance, the Poulan 545123644 features a robust engine that delivers exceptional power. Equipped with a 50cc two-stroke gasoline engine, it offers a balance of torque and RPM, making it ideal for felling trees, limb removal, and cutting firewood.

One of the standout features of the Poulan 545123644 is its lightweight design, which enhances maneuverability and reduces operator fatigue during extended use. Weighing in at just over 11 pounds, it allows users to manage their cutting tasks with ease. The chainsaw also incorporates an ergonomic handle that ensures a comfortable grip, promoting better control while operating.

The chainsaw's 20-inch bar length provides ample reach for cutting larger logs and branches without excessive effort. It also comes equipped with a low-kickback chain, which enhances safety by minimizing the risk of kickback incidents—a common concern for chainsaw users. This feature is particularly important for both novice and experienced operators.

To further enhance performance, the Poulan 545123644 utilizes advanced technologies such as an automatic oiling system, ensuring the chain receives the lubrication it needs for smooth operation. This not only prolongs the lifespan of the chain but also reduces maintenance, allowing users to focus on their cutting tasks.

Another noteworthy aspect of the Poulan chainsaw is its easy-start mechanism, which utilizes a spring-assisted pull starter. This innovation significantly reduces the effort required to start the engine, making it user-friendly, particularly for those who may struggle with traditional starting methods.

In terms of durability, the Poulan 545123644 features a rugged construction that withstands the rigors of regular use, ensuring longevity. Its air filtration system also helps to extend engine life by keeping dust and debris out of the engine.

Overall, the Poulan 545123644 combines power, safety, and ease of use, making it an excellent choice for those looking to tackle outdoor projects with confidence. Whether you are pruning trees or preparing firewood for winter, this chainsaw delivers reliability and performance, ensuring that you can complete your tasks efficiently.
Top Page Image Contents