Manuals / Poulan / Lawn and Garden / Chainsaw

Poulan 545137234 instruction manual Chain Tension, Checking the tension, Adjusting the tension

Models: 545137234

1 19
Download 19 pages 39.6 Kb
Page 7
Image 7

5.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

6.Place chain over and behind the clutch retainer, fitting the drive links in the clutch drum sprocket.

7.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

8.Fit chain drive links into bar groove.

9.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

10.Hold guide bar against the saw frame and install clutch cover.

11.Install bar nuts and finger tighten only. Once the chain is tensioned, you will need to tighten bar nuts.

CHAIN TENSION

(Including units with chain already installed)

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

NOTE: When adjusting chain tension, make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move chain around guide bar. If the chain does not rotate, it is too tight. If the chain is too loose, it will sag below the bar.

Guide

 

Bar

 

Chain Adjustment

Bar Nuts

Tool

(Bar Tool)

 

Adjusting the tension:

Chain tension is very important. Chains stretch during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

An adjusting screw (located on the guide bar) is used to adjust the tension of the chain (see illustration).

1.Turn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail.

Guide bar

Adjusting

Screw

2.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

3.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn ad- justing screw clockwise until sag does not exist.

4.While lifting tip of guide bar, tighten bar nuts securely with the bar tool.

Bar Nuts

5.Use the screwdriver end of the bar tool to move chain around guide bar.

6.If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw. Retighten bar nuts.

7.If chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Page 7
Image 7
Poulan 545137234 instruction manual Chain Tension, Checking the tension, Adjusting the tension
Page 6 Page 8

545137234 specifications

The Poulan 545137234 is a powerful and efficient chainsaw designed for both professional and home use. This model is renowned for its robust performance and durability, making it an excellent choice for cutting firewood, clearing brush, and navigating more demanding woodcutting tasks. With a range of innovative features and cutting-edge technologies, the Poulan 545137234 stands out in the competitive landscape of chainsaws.

One of the main features of the Poulan 545137234 is its reliable engine. Powered by a potent 40cc 2-stroke engine, it delivers substantial power while maintaining efficiency. This engine is designed for superior performance, allowing users to tackle a variety of tasks with ease. Additionally, the engine is equipped with a primer bulb, which simplifies starting the chainsaw, ensuring users can get to work quickly.

The chainsaw features a 16-inch bar and chain, providing an optimal balance between cutting capacity and maneuverability. This size is perfect for cutting larger branches or logs while remaining lightweight and easy to handle, ideal for both novice and experienced operators. The chain itself is designed for smooth and fast cutting, enhancing productivity during operation.

Another standout characteristic of the Poulan 545137234 is its ergonomic design. The chainsaw includes comfort grips and a lightweight frame, which reduce operator fatigue during extended use. The adjustable chain tensioning system allows users to easily maintain the chain’s tightness, enhancing safety and efficiency.

Safety is paramount with the Poulan 545137234. It is equipped with a chain brake, which provides an extra layer of protection by stopping the chain’s movement in the event of a kickback. This feature is crucial in preventing injuries and ensuring a safer working environment.

In terms of technology, the Poulan 545137234 incorporates an advanced air filtration system that keeps the engine cleaner and helps extend its life. This technology is particularly beneficial when working in dusty environments, ensuring that the chainsaw maintains high performance levels over time.

Overall, the Poulan 545137234 combines power, efficiency, and safety features that cater to a wide range of users. Whether you are a seasoned professional or a weekend warrior tackling yard work, this chainsaw is equipped to handle the job with ease and reliability. Its thoughtful design and innovative technologies make it a commendable choice in the world of chainsaws.