Primer Bulb

Start Lever

Starter Handle

5.Pull starter rope handle sharply until en- gine starts and runs.

6.Allow unit to run for 10--15 seconds, then fully squeeze the throttle trigger to disen- gage the starting system.

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until engine runs smoothly.

3.Pull starter rope sharply while squeezing throttle trigger until engine runs.

NOTE: Normally, the warm starting proce- dure can be used within 5--10 minutes after the unit is turned OFF. If the unit sits for more than 10 minutes without being ran, it will be necessary to start the unit by following the steps under STARTING A COLD ENGINE or following the starting instruction steps shown on the unit.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the ON/OFF switch in the ON position. Move the start lever to the RUN position and fully squeeze throttle trigger. Pull the starter han- dle repeatedly while squeezing throttle trigger until engine starts and runs. This could re- quire pulling the starter handle many times, depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL: Edger . . . . . . . . . . . . . . . . . . . . . PP1000E Cultivator . . . . . . . . . . . . . . . . . . PP2000T Blower . . . . . . . . . . . . . . . . . . . . PP3000B Brushcutter . . . . . . . . . . . . . . . . PP4000C Pruner . . . . . . . . . . . . . . . . . . . . PP5000P

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL ATTACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

 

Upper

Coupler

Shaft

Lower

LOOSEN

 

Attachment

 

TIGHTEN

Knob

2.Press and hold the locking/release button. Locking/Release

Button

Coupler

Upper Shaft

Lower Attachment

 

3.While securely holding the engine and upper shaft, pull the attachment straight out of the coupler.

INSTALLING OPTIONAL ATTACH- MENTS

1.Remove the shaft cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler Primary Hole

Guide Recess

Locking/

Upper Release Attachment

Shaft Button

9

Page 8 Page 10
Page 9
Image 9
Poulan 545137277 instruction manual Starting a Warm Engine, Starting a Flooded Engine, Operating the Coupler
Page 8 Page 10

545137277 specifications

The Poulan 545137277 is a robust and efficient chainsaw designed for both amateur and professional users. Offering a blend of power, versatility, and ease of use, this model has gained popularity among various user groups for its performance and reliability.

One of the standout features of the Poulan 545137277 is its powerful engine. Equipped with a 50cc, 2-cycle engine, this chainsaw provides the right balance of torque and speed, allowing users to tackle a wide range of cutting tasks. Whether you are pruning branches, felling trees, or cutting firewood, the ample power ensures that you can complete jobs efficiently. The engine is designed for optimal performance, featuring a fuel-efficient system that reduces consumption while minimizing emissions.

A key technology integrated into the Poulan 545137277 is its Easy Start system, which simplifies the starting process, reducing the effort needed to get the chainsaw running. This feature is particularly beneficial for users who may struggle with traditional starting methods. Additionally, the chainsaw is equipped with an automatic oiler, ensuring that the bar and chain receive a consistent flow of lubrication, which contributes to the tool's longevity and smooth operation.

The design of the Poulan 545137277 includes a lightweight structure, making it easy to handle for extended periods. It boasts an ergonomic handle that provides a comfortable grip, reducing user fatigue during prolonged use. Safety features are also paramount, with a chain brake that quickly stops the chain in emergencies, providing peace of mind while operating.

The Poulan 545137277 has a sturdy 20-inch bar, making it suitable for a variety of cutting applications. This bar length strikes an excellent balance, offering enough reach for larger jobs while remaining manageable for smaller tasks. The chainsaw's chain is designed for quick adjustments, allowing users to maintain optimal tension without hassle.

In summary, the Poulan 545137277 stands out in the chainsaw market due to its powerful engine, user-friendly technologies, and focus on safety and comfort. Whether you are a homeowner looking to maintain your yard or a professional needing reliable equipment, this chainsaw provides the performance and durability required to get the job done effectively.
Top Page Image Contents