TRIMMER LINE ADVANCE

The cutting head advances line automati- cally. Do not tap head on the ground to ad- vance line. This may break parts and cause cutting head to malfunction.

Upon unit start up, the line will advance auto- matically to the correct cutting path length. Always keep the shield in place when the tool is being operated.

WARNING: Use only 0.080 inch (2

mm)diameter round line. Other sizes and shapes of line will not advance properly and will result in improper cutting head function or can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous mis- sile that can cause serious injury.

CUTTING METHODS

WARNING: Use minimum speed and do not crowd the line when cutting around hard objects (rock, gravel, fence posts, etc.), which can damage the trimmer head, become entangled in the line, or be thrown causing a serious hazard.

SThe tip of the line does the cutting. You will achieve the best performance and mini- mum line wear by not crowding the line into the cutting area. The right and wrong ways are shown below.

Tip of the Line

Line Crowded Into

Does The Cutting

Work Area

RightWrong

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences. To help avoid damage especially to delicate vegetation or trees with tender bark, shorten line to 4--5 inches (10--13 cm) and use at less than full throttle.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can wrap such as small posts, trees or fence

wire.

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique re- moves unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

3 inches (8 cm)

 

above ground

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

8

Page 7 Page 9
Page 8
Image 8
Poulan 545154718, P3500 Trimmer Line Advance, Cutting Methods, Tip of the Line, Does The Cutting Work Area
Page 7 Page 9

P3500, 545154718 specifications

The Poulan 545154718, P3500 is a powerful and versatile chainsaw designed for both residential and professional use. This model is well-known for its reliability and efficiency, making it a popular choice among homeowners, landscapers, and tree care professionals alike.

One of the standout features of the P3500 is its robust 50cc engine. This engine delivers ample power to tackle a wide range of cutting tasks, from trimming branches to felling medium-sized trees. The design of the engine not only ensures high performance but also offers easy starting capabilities, reducing the hassle for the user, especially in colder conditions or after extended periods of inactivity.

In terms of cutting performance, the Poulan P3500 is equipped with a 20-inch bar and chain, providing an ideal balance between cutting capacity and control. This length allows the user to efficiently cut through thicker logs while maintaining precision for smaller cuts. The chain itself is designed for durability, ensuring that it remains sharp and effective over time, which contributes to a smoother cutting experience.

The overall ergonomics of the design make the P3500 user-friendly. It features a lightweight construction, which helps reduce operator fatigue during extended use. The innovative handle design provides a comfortable grip, enhancing control and stability during cutting operations. Additionally, the chainsaw is equipped with anti-vibration technology, which further minimizes fatigue and allows for longer, more comfortable use.

Safety is a crucial aspect of any chainsaw, and the Poulan P3500 does not disappoint. It includes several safety features such as a chain brake and a throttle lock-out, ensuring that the user can operate the tool safely. The accessible air filter and fuel tank make maintenance easy, allowing users to keep their chainsaw in optimal condition with minimal effort.

Furthermore, the Poulan P3500 is designed with easy-to-use adjustments for chain tensioning, ensuring that the chain can be tightened or loosened without the need for additional tools. This feature enhances the convenience of the chainsaw, making it simpler for users to perform routine maintenance.

In conclusion, the Poulan 545154718, P3500 is a well-rounded chainsaw that delivers power, comfort, and safety in one package. With its features tailored for both novice and experienced users, it stands out as a reliable tool for anyone looking to manage their cutting tasks effectively. Whether you are pruning trees or tackling larger landscaping projects, the P3500 is engineered to meet your needs with performance and efficiency.
Top Page Image Contents