5.Add a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen. For normal homeowner use, however, the muffler and spark arresting screen will not re- quire any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your authorized service dealer.

CARBURETOR IDLE SPEED ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The blade will be moving during most of this procedure. Wear your protective equipment and observe all safety precautions. When making adjust- ments, use a screwdriver short enough to keep your hands behind the handguard and away from the blade. After making adjust- ments, the blade must not move at idle speed. The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

SEngine will not idle when the throttle is re- leased.

SThe blade moves at idle.

Keep others away when making idle speed ad- justments. Make adjustments with the unit rest- ing on a level surface free of debris that can be caught in the hedge trimmer blade. Serious inju- ry to the operator and others can occur if the carburetor is not properly adjusted. Keep all parts of your body away from the blade and muffler.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without blade moving (idle too fast) or en- gine stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if the blade moves at idle.

WARNING: Recheck the idle speed after each adjustment. The blade must not move at idle speed to avoid serious injury to the operator or others.

Idle Speed Screw

If you require further assistance or are unsure about performing this procedure, contact an

authorized

service dealer or call

1--

800--

554--

6723.

BLADE ADJUSTMENT

The clearance between the cutting blades must be adjusted periodically to maintain opti- mal performance and sharp cutting.

Nut

Blade guide

Blades

Flat

Cupped

Washer

Washer

Blade

Bolt

Nuts

guide

1.Using a wrench, loosen each nut on the top side of the blade guide.

Nut TOP SIDE OF BLADE

Wrench

2.Tighten each bolt from underside of blade with a wrench.

UNDERSIDE OF BLADE

Bolt

3. Loosen each bolt 1/2 turn.

-- 7 --

Page 7
Image 7
Poulan 545186733 Inspect Muffler and Spark Arresting Screen, Carburetor Idle Speed Adjustment, Blade Adjustment

545186733 specifications

The Poulan 545186733 is a powerful and versatile gas-powered chainsaw designed for various cutting tasks, making it ideal for both homeowners and professional users. With its robust engineering and innovative features, this chainsaw stands out in the competitive market of outdoor power equipment.

One of the main features of the Poulan 545186733 is its engine. It is equipped with a reliable 50cc, 2-stroke gasoline engine that delivers impressive performance. This engine provides abundant power for cutting through thick branches, felling small to medium-sized trees, and handling challenging landscaping tasks. The efficient design also ensures that users can tackle jobs without the need for frequent refueling.

The chainsaw comes with a 20-inch bar and chain, which strikes a balance between maneuverability and cutting capacity. This length is optimal for various applications, from pruning to larger tree removal. Additionally, the low-kickback chain enhances safety while allowing users to maintain control during operation.

Another significant aspect of the Poulan 545186733 is its starting system. It features an easy-start technology that reduces the effort required to start the chainsaw. Users can benefit from a simplified pull-start mechanism that minimizes cord resistance, allowing for quick and hassle-free starts even in cold weather.

Comfort and usability are additional cornerstones of this model. The chainsaw is designed with an ergonomically shaped handle that reduces vibrations, enabling extended use without causing fatigue. The lightweight construction of the saw allows for more comfortable handling and maneuvering while working in different positions.

For enhanced convenience, the Poulan 545186733 includes an automatic oiling system that ensures the chain remains adequately lubricated during operation. This feature not only enhances the efficiency of the cutting process but also prolongs the lifespan of both the bar and the chain.

Furthermore, the chainsaw is equipped with a clear-view gas and oil tank, making it easy for users to monitor fluid levels at a glance. This thoughtful design contributes to the overall user experience, ensuring that users can maintain optimal performance without interruptions.

In summary, the Poulan 545186733 combines power, efficiency, and user-friendly features, making it a top choice for those in need of a reliable chainsaw. With its well-balanced design, easy starting mechanism, and robust performance capabilities, this chainsaw caters to a wide range of cutting tasks, ensuring that both novice and experienced users can work efficiently and effectively.