ADJUSTING THE CUTTING ANGLE
WARNING: Never attempt to adjust the cutting angle when the engine is running. Always release the throttle trigger, wait until the blade stops moving, move the powerhead ON/OFF switch to the OFF position, and dis- connect spark plug (or disconnect from pow- er source) before making adjustments.
Adjust the angle of the trimmer to suit the area you are trimming. Adjust the blade as follows:
1.Use one hand to grasp the angle adjust- ment holder.
2.Loosen the fixed screw by using a wrench to turn it counterclockwise.
3.When the blade is in the desired position, turn the fixed screw clockwise to secure the blade.
Angle Adjustment
Track
Fixed
Screw
Angle Adjustment Holder
MAINTENANCE
WARNING: Always stop unit and dis- connect spark plug wire (or disconnect pow- erhead from power source) before performing maintenance.
BLADE MAINTENANCE
WARNING: The blade moves mo- mentarily after the trigger is released.. To avoid serious injury, make sure the blade has stopped moving and disconnect the spark plug (or disconnect powerhead from power source) before performing work on the blade.
WARNING: Always replace a blade that is bent, warped, cracked, broken, or damaged in any other way. Never attempt to straighten and reuse a damaged blade. Use only specified replacement blade. Wear pro- tective gloves when handling or performing maintenance on the blade to help avoid injury.
SFor easier operation and longer blade life, lubricate the blade before and after each use.
SApply a light machine oil along the edge of the top strap as shown.
OIL
Top Strap
STORAGE
WARNING: Perform the following steps after each use:
SAllow attachment and gearbox to cool be-
fore storing or transporting.
SPosition attachment so that any sharp ob-
ject cannot accidentally cause injury.
SStore the attachment in a dry, well venti- lated area out of the reach of children.
SEASONAL STORAGE
Prepare attachment for storage at end of sea- son or if it will not be used for 30 days or more.
If your hedge trimmer attachment is to be stored for a period of time:
SClean the entire attachment. S Store in a clean dry area.
S Clean all parts and check for damage. Have damaged parts repaired or replaced by an authorized service dealer.
S Keep all nuts, bolts, and screws tight.
S Lightly oil external metal surfaces, includ- ing the blade.
7
