ASSEMBLY
WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.
Examine parts for damage. Do not use dam- aged parts.
NOTE: If you need assistance or find parts missing or damaged, call
Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.
ADJUSTING THE ASSIST HANDLE
1.Loosen wing nut on handle.
2.Pivot the handle to a comfortable position; retighten wing nut.
Wing Nut
Groove 
ATTACHING SHIELD
WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.
For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.
1.Remove wing nut from shield.
2.Insert bracket into slot as shown.
3.Pivot shield until bolt passes through hole in bracket.
4.Securely tighten wing nut onto bolt.
PIVOT Shield | Slot |
| Bracket |
Line Limiter |
|
Blade |
|
| Wing |
| Nut |
OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
| Shaft | Assist Handle |
| Muffler |
|
|
| ||
|
|
|
| |
Edge |
|
|
|
|
Guide |
| Spark Plug |
|
|
| Shield |
| Primer Bulb | Throttle Trigger |
|
|
|
| |
|
| STOP |
|
|
|
| Switch |
| Fuel Mix Fill Cap |
|
|
|
| |
Trimmer |
|
|
|
|
Head | Line Limiter |
| Choke Lever | |
| Blade |
| ||
Starter Handle
5
