Tip of the line

Line crowded into

Scalping

does the cutting.

work area.

 

RightWrong

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can wrap

such as small posts, trees or fence wire.

SFor mowing or sweeping, use full throttle for

a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique removes unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique in- creases line wear.

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used to blow away loose debris from an area. Keep the line parallel to and above the area surface and swing the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

13

Page 12 Page 14
Page 13
Image 13
Poulan 115248826, 952711944 Maintenance, Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts
Page 12 Page 14

115248826, 952711944 specifications

The Poulan 952711944 and 115248826 are essential components designed to enhance the performance and usability of outdoor power equipment, particularly chainsaws and trimmers. Known for their reliability and efficiency, these parts exemplify Poulan's commitment to delivering high-quality products for both professional users and homeowners.

One of the standout features of the Poulan 952711944 is its durability. Constructed with high-grade materials, it is built to withstand the demanding conditions that come with outdoor work. This durability ensures that the part can resist wear and tear, enabling it to maintain peak performance over an extended period. Furthermore, the precise engineering of the 952711944 ensures compatibility with several Poulan models, making it a versatile choice for users looking to replace or upgrade their equipment.

In terms of technology, the 952711944 incorporates advanced design principles that focus on ease of use and safety. Its ergonomic design allows for straightforward installation, minimizing downtime and getting users back to work quickly. The component is engineered to fit snugly, reducing the risk of vibration during operation, which in turn aids in accuracy and comfort.

On the other hand, the Poulan 115248826 is equally impressive, providing essential support for trimmers. It boasts a lightweight construction, allowing for enhanced maneuverability during operation. This is particularly crucial for those who need to navigate tight spaces or maintain large areas without fatigue. The design also features a user-friendly interface, making it accessible for individuals at any skill level.

Both the 952711944 and 115248826 incorporate technologies that prioritize fuel efficiency and reduced emissions. This eco-conscious approach is particularly relevant in today’s market, where environmental sustainability is a growing concern. Poulan’s advancements in this area demonstrate their commitment to producing equipment that not only performs well but also respects the environment.

In summary, the Poulan 952711944 and 115248826 are pivotal components that embody the brand's dedication to quality and innovation. With their robust build, user-friendly designs, and environmentally friendly technologies, these parts are ideal for anyone looking to enhance the performance of their outdoor power equipment. Whether for professional landscaping or home gardening, the reliability of these components speaks for itself.
Top Page Image Contents