Location of shipping spacer

 

Chain Brake

Chain Brake

Nuts

 

 

Bar Tool

3.Turn adjusting screw on bar counter- clockwise to move the tensioning rack as far as it will go toward the front of the bar.

Adjusting

Screw

Tensioning Rack

4.Slide the bar behind clutch drum until bar stops against clutch drum sprocket.

Mount the bar

5.Prepare the chain by checking the proper direction. Without following the illustration it is easy to place the chain on the saw in the wrong direction. Use the illustration of the chain to determine the proper direction.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

6.Place the chain over and behind the clutch, fitting the drive links in the clutch drum sprocket.

Place chain onto the sprocket

7.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

8.Fit chain drive links in to bar groove.

9.Pull the bar forward until the chain is snug in the groove of the bar. Ensure all drive links are in the bar groove.

10.Hold guide bar against the saw frame and install the chain brake.

11.Replace the chain brake nuts and tighten finger tight. Once the chain is ten- sioned, you will need to tighten chain bra- ke nuts.

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time before you start the chain saw.

An adjusting screw (located on the guide bar) is used to adjust the tension of the chain (see illustration).

SLoosen the chain brake nuts.

STurn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail.

Guide bar

Adjusting

Screw

SUsing the screwdriver end of the bar tool, roll chain around guide bar to ensure all links are in bar groove.

7

Page 7
Image 7
Poulan 952802075 Checking the tension, Adjusting the tension, Adjusting Screw Tensioning Rack, Tip Bar, Cutters

952802075 specifications

The Poulan 952802075 is a well-regarded, lightweight trimmer designed for both homeowners and professionals looking to maintain their lawns and gardens efficiently. One of its standout features is the 25cc 2-cycle gas engine, which provides ample power to tackle even the most challenging landscaping tasks. This engine is specifically designed for superior performance, delivering reliable starting and smooth operation, making it particularly user-friendly for those who may not be experienced with outdoor power equipment.

A key characteristic of the Poulan 952802075 is its versatility. It comes equipped with a detachable head that allows users to switch between various attachments, such as a string trimmer, hedge trimmer, and blower, catering to different gardening needs. This versatility is further enhanced by the inclusion of a dual-line bump head, which ensures efficient cutting and reduces the amount of time spent trimming grass and weeds.

Ergonomics play a considerable role in the design of the Poulan 952802075. The trimmer features a straight shaft, which allows for better reach under bushes or around flower beds, promoting more efficient trimming in tight spaces. Additionally, the easy-grip handle provides comfort during prolonged use, minimizing fatigue for the operator.

Poulan’s commitment to innovation is evident in the incorporation of advanced technologies into the 952802075 model. The trimmer features a simplified starting system, which reduces the effort required to start the engine, making it more accessible for all users. Furthermore, the design includes features aimed at reducing vibration, which not only enhances user comfort but also leads to extended operating periods without discomfort.

Another notable characteristic of the Poulan 952802075 is its lightweight construction, making it easy to maneuver without sacrificing durability. Despite its lightweight nature, the trimmer is built to withstand the rigors of outdoor work, ensuring longevity and reliability.

In summary, the Poulan 952802075 combines power, versatility, and user-friendly features in a well-designed package, making it an excellent choice for anyone looking to maintain their outdoor spaces efficiently. Its advanced technology, ergonomic aspects, and lightweight build set it apart as a leading option in the outdoor power equipment market. This trimmer ultimately serves as a dependable tool for achieving a well-kept yard with minimal hassle.