MAINTENANCE

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

BLADE

CENTER

HOLE

5/8" BOLT OR PIN

FIG. 9

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

Disconnect BLACK battery cable first then RED bat- tery cable and remove battery from tractor.

Rinse the battery with plain water and dry.

Clean terminals and battery cable ends with wire brush until bright.

Coat terminals with grease or petroleum jelly.

Reinstall battery (See “REPLACING BATTERY” in the Service and Adjustment section of this manual).

V-BELTS

Check V-belts for deterioration and wear after 100 hours and

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

 

 

30 32 40

 

60

80

100

C

-30

-20

-10

0

10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oil_visc_chart1_e

FIG. 10

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tractor is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 10 and 11)

Determine temperature range expected before oil change. All oil must meet API service classification SG-SL.

Be sure tractor is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

Remove yellow cap from end of drain valve and install the drain tube onto the fitting.

 

OIL DRAIN VALVE

CLOSED

 

AND

 

LOCKED

 

POSITION

 

YELLOW CAP

DRAIN

TUBE

 

replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grade according to your expected operating temperature.

17

FIG. 11

• Unlock drain valve by pushing inward and turning counterclockwise.

• To open, pull out on the drain valve.

• After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

• Remove the drain tube and replace the cap onto to the bottom fitting of the drain valve.

• Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

• Use gauge on oil fill cap/dipstick for checking level. For accurate reading, insert dipstick into the tube and push down firmly into place before removing. Keep oil up to, but not over, the “FULL” line on dip- stick. Push dipstick down firmly into the tube when finished.

Page 17
Image 17
Poulan 96012006904 manual Engine, Battery, Belts, Transaxle Cooling, Lubrication

96012006904 specifications

The Poulan 96012006904 is a powerful and versatile lawn mower that offers a range of features designed to make lawn care easier and more efficient. This model stands out in the market due to its robust construction and innovative technologies aimed at enhancing mowing performance.

One of the key features of the Poulan 96012006904 is its powerful engine. Equipped with a reliable gas-powered engine, this mower delivers strong torque and efficient cutting performance. This ensures that users can easily tackle various types of grass and terrain without experiencing bogging or stalling.

The mower also boasts a self-propulsion system that allows users to maneuver the equipment effortlessly across their lawn. This feature is incredibly beneficial for maintaining speed and reduces the physical effort required during mowing, particularly on slopes or uneven ground. The adjustable speed settings provide users with the flexibility to match their pace, making the mowing process more comfortable.

Another standout characteristic of the Poulan 96012006904 is its cutting deck, which is designed to provide excellent grass cutting performance. With a generous cutting width, this mower can cover more ground in less time, making it suitable for larger lawns. Moreover, the cutting height adjustment feature provides users with the ability to customize the grass length to their preference, achieving a professional-looking cut.

The mower is also equipped with advanced technology such as a mulching capability, which allows users to finely chop grass clippings and return them to the lawn, promoting healthy growth and reducing the need for additional fertilizers. Furthermore, the rear discharge feature efficiently disperses grass clippings, minimizing windrowing and making clean-up easier.

The Poulan 96012006904 prioritizes user comfort and safety. The ergonomic handle grips provide superior comfort during operation, while the safety features ensure that the mower can only be engaged when properly operated, adding an essential layer of protection.

In conclusion, the Poulan 96012006904 is a standout choice for homeowners seeking a reliable and efficient lawn mower. With its powerful engine, self-propulsion system, adjustable cutting height, and mulching capabilities, it offers an excellent blend of performance and user-friendly features, making lawn maintenance a breeze. Whether tackling tough grass, tackling larger lawns, or simply wanting a well-kept yard, this mower has the capabilities to deliver impressive results.