SERVICE AND ADJUSTMENTS

REPLACING BATTERY (See Figs. 29 and 30)

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from acci- dental grounding.

Lift seat pan to raised position.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

Install new battery with terminals in same position as old battery.

First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal.

Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely.

SEAT PAN

 

FIG. 29

 

 

TERMINAL

KEPS NUT

COVER

 

HEX

BOLT

POSITIVE (RED) CABLE

NEGATIVE (BLACK) CABLE

 

 

 

FIG. 30

TO REPLACE HEADLIGHT BULB

Raise hood.

Pull bulb holder out of the hole in the backside of the grill.

Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 31)

Raise hood.

Unsnap headlight wire connector.

Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

03075

FIG. 31

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see engne manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair and/or adjustment.

24

Page 24
Image 24
Poulan 96042003401 To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse, To Adjust Throttle Control Cable

413420, 96042003401 specifications

The Poulan 96042003401,413420 is a powerful and versatile equipment designed for both homeowners and professionals seeking high-performance tools for lawn care and maintenance. This model stands out in the market for its robust features, advanced technologies, and user-friendly characteristics.

One of the main features of the Poulan 96042003401,413420 is its efficient engine. The equipment is equipped with a reliable gas engine that provides ample power while ensuring smooth operation. This allows users to tackle various tasks such as trimming, edging, and cutting grass with ease. The engine's design emphasizes fuel efficiency, which helps users save on refueling costs over time.

In addition to its powerful engine, the Poulan 96042003401,413420 incorporates a user-friendly starting system. The easy start feature minimizes the effort required to get the machine up and running. This is particularly beneficial for users who may not be experienced with starting gas-powered equipment.

The design of the Poulan 96042003401,413420 places a strong emphasis on ergonomics. The equipment features comfortable grips that minimize strain during extended use, allowing for better maneuverability and control. This thoughtful design helps to reduce fatigue, making it easier for users to complete yard work efficiently.

The cutting technology employed in the Poulan 96042003401,413420 ensures precise and clean cuts. With an adjustable cutting height, users can customize the length of their grass to suit specific preferences or seasonal needs. This versatility makes the equipment suitable for various types of lawns and landscaping designs.

Durability is another key characteristic of the Poulan 96042003401,413420. Constructed from high-quality materials, this equipment is built to withstand the rigors of outdoor use. Users can depend on this model to perform consistently over time, even under challenging conditions.

Maintenance is simplified with this model as well. The Poulan 96042003401,413420 features easy-access components, allowing users to perform routine checks and maintenance tasks without difficulty. This ensures the longevity of the equipment and helps maintain optimal performance.

Overall, the Poulan 96042003401,413420 appeals to a wide range of users due to its powerful engine, ergonomic design, advanced cutting technology, durability, and ease of maintenance. Whether for a small garden or a larger landscape, this equipment is designed to meet various lawn care needs efficiently.