SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

•Depress brake pedal fully and set parking brake.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 17)

•Place attachment clutch in “DISENGAGED” position.

•Lower attachment lift lever to its lowest position.

•Roll belt off engine pulley (M) and belt keepers (G).

•Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket.

•Remove clutch cable spring (Q) from idler arm (R).

•Disconnect front link (E) from mower - remove retainer spring and washer.

•Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

CAUTION: AFTER REAR LIFT LINKS

ARE DISCONNECTED, THE ATTACH-

MENT LIFT LEVER WILL BE SPRING

LOADED. HAVE A TIGHT GRIP ON LIFT

LEVER WHEN CHANGING POSITION

OF THE LEVER.

•Slide mower out from under right side of tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINK (E) AND REAR LIFT LIKS

(C)FROM TRACTOR AND HOOK THE CLUTCH SPRING

(Q)INTO THE CABLE GUIDE ON FRONT EDGE OF

TO INSTALL MOWER (See Fig.17-21)

Be sure tractor is on level surface and engage parking brake.

•Lower attachment lift lever to it's lowest position.

CAUTION: LIFT LEVER IS SPRING

LOADED. HAVE A TIGHT GRIP ON

LIFT LEVER, LOWER IT SLOWLY AND

ENGAGE IN LOWEST POSITION.

NOTE: Be sure mower side suspension arms (A) are point- ing forward before sliding mower under tractor.

•Slide mower under tractor until it is centered under tractor.

•ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring.

•Repeat on opposite side of tractor.

•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring.

•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F).

G MF

LOWER DASH.

Q R

G

P

A E

B

C

K

L D

FIG. 17

18

Page 17 Page 19
Page 18
Image 18
Poulan 96042006800, PB195H46YTX Service and Adjustments, To Remove Mower See Fig, To Install Mower See -21, Lower Dash
Page 17 Page 19

418771, PB195H46YTX, 96042006800 specifications

The Poulan 96042006800, commonly recognized as the PB195H46YTX lawn tractor, is engineered for homeowners who prioritize efficiency and performance in maintaining their yards. This robust machine boasts a powerful 19.5 HP Briggs & Stratton engine, which offers reliable starting and consistent power delivery. With its robust build and advanced features, the PB195H46YTX is perfect for tackling large lawns and uneven terrains with ease.

One of the standout features of the PB195H46YTX is its 46-inch cutting deck, which allows for a wider cutting swath, reducing the time spent mowing. The deck is designed with a durable material and a reinforced edge, ensuring it withstands the rigors of regular usage while providing a clean and precise cut. Additionally, the tractor offers adjustable cutting heights, enabling users to customize the grass length according to their preferences and the seasonal needs of their lawn.

The transmission system of the PB195H46YTX employs an easy-to-use hydrostatic drive, which offers seamless speed control without the need for manual gear shifting. This feature simplifies operation, allowing users to focus more on steering and mowing rather than constantly adjusting speed. The tractor also features a tight turning radius, making it adept at navigating around obstacles like trees and flower beds.

Comfort and convenience are also vital components of the PB195H46YTX’s design. It comes equipped with a plush, high-back seat with adjustable settings, allowing users to find their optimal position during longer mowing sessions. The ergonomically designed steering wheel and controls are positioned for easy access, minimizing strain and fatigue.

Incorporating advanced technologies, this lawn tractor is built with a durable frame and advanced cutting system, ensuring longevity and high performance. The unit is compatible with various accessories, including baggers and mulchers, making it a versatile option for year-round yard maintenance.

Overall, the Poulan 96042006800, PB195H46YTX, and its associated model number 418771 combine power, comfort, and functionality to provide an exceptional mowing experience. Its features make it a smart choice for homeowners committed to achieving a well-kept lawn without sacrificing their time or effort.
Top Page Image Contents