
ASSEMBLY
NOTE: Be sure mower side suspension arms (A) are | • |
pointing forward before sliding mower under tractor. |
|
•Slide mower under tractor until it is centered under tractor.
• FIRST INSTALL | • |
-From right side of mower, insert
T | S |
| |
A | • |
| |
| 02995 |
FIG. 6
- Pivot bar towards you and insert other end of bar |
| |
into hole in rear mower bracket (D). Move mower | • | |
as needed to insert bar. | ||
|
-Secure with washer and retainer spring as shown using small 5/16 retainer spring.
D |
02996 |
FIG. 7
ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring.
Repeat on opposite side of tractor.
A
B
FIG. 8
ATTACH REAR LIFT LINKS (C) - Insert rod end of lift link assembly into hole in tractor lift shaft suspension arm (L) and pivot link down to mower. Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.
Repeat on opposite side of tractor.
L
C
D
FIG. 9
LB
M
K
AF
E
H
S
C
D |
FIG. 10
7