SERVICE AND ADJUSTMENTS

TO REPLACE MOTION DRIVE BELT (See Fig. 39)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1.Remove mower (See “TO REMOVE MOWER” section in this manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Disconnect clutch wire harness (A).

3.Remove anti-rotation link (B) on right side of tractor.

4.Removebeltfromstationaryidler(C)andclutchingidler(D).

5.Remove belt from centerspan idler (E).

6.Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (F).

7.Remove belt downward from engine pulley and around electric clutch (G).

8.Slide belt toward rear of tractor, off the steering plate

(H) and remove from tractor.

BELT INSTALLATION -

1.Install new belt from tractor rear to front, over the steer- ing plate (H) and above clutch brake pedal shaft (J).

2.Pull belt toward front of tractor and roll belt around electric clutch and onto engine pulley (G).

3.Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pul- ley (F). Be sure belt is inside the belt keeper.

4.Install belt on centerspan idler (E).

5.Installbeltthroughstationaryidler(C)andclutchingidler(D).

6.Reinstall anti-rotation link (B) on right side of tractor. Tighten securely.

7.Reconnect clutch harness (A).

8.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

9.Install mower (See “TO INSTALL MOWER” section in

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

2.Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL (See Fig. 41)

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot

this manual).

B A

G

H

and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

 

C

D

J

 

E

F

02953 electric

SQUARE KEY (REAR

WHEEL ONLY)

Fig. 41

Fig. 39

23

Page 23
Image 23
Poulan 433432 To Replace Motion Drive Belt See Fig, To Check Brake, Front Wheel TOE-IN/CAMBER, To Remove Wheel See Fig

433432, PB26H54YT, 96042011000 specifications

The Poulan PB26H54YT, model number 96042011000, is a versatile and powerful lawn tractor designed for homeowners seeking a reliable solution for their yard maintenance needs. This lawn tractor stands out in the market for its combination of features, technological advancements, and user-friendly characteristics, making it an excellent choice for both novice and experienced users.

One of the main features of the PB26H54YT is its robust 26-horsepower engine. This powerful engine ensures that the tractor can handle a variety of tasks, from mowing to towing, without sacrificing performance. The engine is paired with a hydrostatic transmission, allowing for smooth and effortless speed adjustments. This feature is particularly advantageous for navigating complex landscapes, as it provides precise control over speed and direction.

The PB26H54YT is equipped with a 54-inch cutting deck, which enables users to mow large areas efficiently. The cutting deck design includes reinforced edges, enhancing durability and preventing wear over time. Additionally, the deck is adjustable, allowing users to select the desired cutting height for their specific grass type and growth conditions. This adaptability ensures a clean and professional-looking cut every time.

Another noteworthy characteristic is the tractor's ease of operation. The intuitive control panel includes a comfortable seat with a high backrest, providing excellent support during long mowing sessions. The steering wheel is ergonomically designed for user comfort, while the pedal-operated transmission enhances maneuverability. Users will also appreciate the electric start feature, which eliminates the need for pull cords, making starting the engine a breeze.

Safety is a top priority with the PB26H54YT, as it is equipped with essential safety features such as a cut-off switch that activates when the operator leaves the seat. This feature helps prevent accidents, providing peace of mind to users while operating the tractor. Additionally, the wide rear tires offer enhanced traction, ensuring stability on uneven terrain, which is a common challenge in many yards.

Overall, the Poulan PB26H54YT,96042011000,433432 combines power, efficiency, and user-centered design, making it an ideal solution for residential lawn care. Whether it's mowing, hauling, or handling other yard tasks, this lawn tractor is built to deliver reliability and performance, ensuring that your lawn remains well-maintained all season long.