IMPORTANT

Safe Operation Practices for Walk-Behind Snow Throwers

This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always disconnect spark plug wire and place it where it cannot contact plug in order to prevent acci- dental starting when setting up, trans- porting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping sur- faces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

Training

1.Read, understand and follow all instructions on the machine and in the manual(s) before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, par- ticularly small children.

4.Exercise caution to avoid slipping or falling, especially when operating the snow thrower in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches and shift into neutral before starting the engine (motor).

3.Do not operate the equipment without wearing adequate winter garments. Avoid loose fitting clothing that can get caught in moving parts. Wear footwear that will improve footing on slippery surfaces.

4.Handle fuel with care; it is highly flammable

(a)Use an approved fuel container.

(b)Never add fuel to a running engine or hot en- gine.

(c)Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

(d)Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place contain- ers on the ground, away from your vehicle, before filling.

(e)When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

(f)Keep the nozzle in contact with the rim of the fuel tank or container opening at all times, until refuel- ing is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing im- mediately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surface.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufacturer).

8.Always wear safety glasses or eye shields during op- eration or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Operation

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the collector/impeller

 

housing or discharge chute, and when making any

2

repairs, adjustments or inspections.

 

Page 2
Image 2
Poulan 96192000400, 199342 owner manual Safe Operation Practices for Walk-Behind Snow Throwers

199342, 96192000400 specifications

The Poulan 199342,96192000400 is a remarkable addition to the world of outdoor power equipment, specifically designed for those who take their yard work seriously. This model stands out for its robust build quality and user-friendly features, making it an excellent choice for both homeowners and landscaping professionals alike.

One of the main features of the Poulan 199342,96192000400 is its powerful engine, which provides impressive performance for a wide range of yard tasks, including trimming, pruning, and cutting. The model is equipped with a reliable two-cycle engine, which ensures a balance of power and efficiency. This engine allows the user to tackle tough jobs with ease, making it ideal for heavy-duty tasks.

In terms of technology, the Poulan model incorporates advanced starting systems that minimize the effort it takes to start the machine. Features such as an easy-to-pull recoil start mechanism reduce strain on the user while ensuring quicker ignition, even in colder weather. Additionally, the engine is designed for fuel efficiency, allowing users to complete more work with less fuel, which not only saves money but also reduces environmental impact.

The construction of the Poulan 199342,96192000400 is another feature that deserves attention. Built with durable materials, this model is designed to withstand the rigors of outdoor use. The ergonomic design of the handle and the overall lightweight construction enhance user comfort, enabling longer working periods without fatigue. Moreover, the machine features anti-vibration technology, which minimizes hand fatigue and improves overall handling during operation.

Furthermore, this model is equipped with a cutting system that allows for precise cuts and improved control for detailed tasks, making it highly versatile. The adjustable cutting height settings enable users to customize their approach depending on the specific requirements of their yard, further enhancing the machine’s flexibility.

In conclusion, the Poulan 199342,96192000400 is a powerful, efficient, and ergonomically designed tool that offers a host of features tailored for both amateurs and professionals. With its reliable engine, advanced technology, and durable construction, it's an excellent investment for anyone looking to maintain their outdoor spaces effectively. Whether it's for routine maintenance or tackling more demanding landscaping projects, this model is up to the challenge.