IMPORTANT

Safe Operation Practices for Walk-Behind Snow Throwers

This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always disconnect spark plug wire and place it where it cannot contact plug in order to prevent acci- dental starting when setting up, trans- porting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping sur- faces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

Training

1.Read, understand and follow all instructions on the machine and in the manual(s) before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, par- ticularly small children.

4.Exercise caution to avoid slipping or falling, especially when operating the snow thrower in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches and shift into neutral before starting the engine (motor).

3.Do not operate the equipment without wearing adequate winter garments. Avoid loose fitting clothing that can get caught in moving parts. Wear footwear that will improve footing on slippery surfaces.

4.Handle fuel with care; it is highly flammable

(a)Use an approved fuel container.

(b)Never add fuel to a running engine or hot en- gine.

(c)Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

(d)Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground, away from your vehicle, before filling.

(e)When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

(f)Keep the nozzle in contact with the rim of the fuel tank or container opening at all times, until refuel- ing is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing im- mediately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surface.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufacturer).

8.Always wear safety glasses or eye shields during op- eration or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Operation

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the collector/impeller housing or discharge chute, and when making any

2

repairs, adjustments or inspections.

 

Page 1 Page 3
Page 2
Image 2
Poulan 96192002301, 422073 owner manual Safe Operation Practices for Walk-Behind Snow Throwers
Page 1 Page 3

422073, 96192002301 specifications

The Poulan 96192002301, 422073 is a highly versatile and powerful line trimmer designed to meet the demanding needs of both residential users and professional landscapers. With its robust construction and advanced features, this trimmer stands out in a competitive market, making it an excellent choice for trimming grass, weeds, and other vegetation with precision and ease.

One of the main features of the Poulan 96192002301, 422073 is its powerful engine, which provides ample power to tackle even the toughest tasks. The engine is designed for efficient performance, ensuring that users can complete their work quickly and effectively. The trimmer's lightweight design enhances maneuverability, allowing users to reach difficult areas without fatigue during prolonged use.

The Poulan trimmer incorporates a 2-cycle engine with an efficient fuel system, optimizing fuel consumption while minimizing emissions. This combination of power and efficiency makes it an environmentally friendly option, attractive to those who are conscious of their carbon footprint. The easy starting mechanism reduces the effort required to start the engine, enabling users to get to work without hassle.

In terms of cutting performance, the Poulan 96192002301, 422073 boasts a durable trimmer head equipped with a dual-line setup. This feature allows for a wider cutting swath, significantly reducing trimming time and improving efficiency. The trimmer head can be easily reloaded, ensuring that you spend more time working on your landscaping tasks and less time on maintenance.

Comfort is also a focal point in the design of this trimmer. It features an adjustable handle, which can be customized to fit users of different heights, promoting ergonomic use and reducing strain on the back and arms during operation. The lightweight body further contributes to ease of use, ensuring that operators can handle the trimmer for extended periods without discomfort.

Safety is paramount in any equipment, and the Poulan 96192002301, 422073 includes several safety features to protect users. The protective guard prevents debris from being thrown at the operator, while the throttle lock ensures that the engine runs smoothly and consistently.

Overall, the Poulan 96192002301, 422073 is a powerful and efficient line trimmer that combines advanced technology with user-friendly features. Whether you are a homeowner looking to keep your yard pristine or a professional landscaper maintaining commercial properties, this trimmer is designed to deliver reliable performance and exceptional results. Its blend of power, efficiency, and comfort makes it a standout choice for anyone in need of a reliable trimming solution.
Top Page Image Contents