OPERATION

TO ADJUST SKID PLATES (See Fig. 15)

NOTE: The wrench provided in your parts bag may be used to adjust the skid plates.

Skid plates are located on each side of the auger housing and adjust the clearance between the scraper bar and the ground surface. Adjust skid plates evenly to proper height for current surface conditions. For removal of snow in normal conditions, such as a paved driveway or sidewalk, place skid plates in the highest position (lowest scraper clearance) to give a 1/8" clearance between the scraper bar and the ground. Use a middle position if the surface to be cleared is uneven.

NOTE: It is not recommended to operate the snow thrower over gravel or rocky surfaces. Objects such as gravel, rocks or other debris, can easily be picked up and thrown by the impeller, which can cause serious personal injury, property damage or damage to the snow thrower.

If snow thrower must be operated over gravel surface, use extra caution and be sure skid plates are adjusted to lowest (highest scraper clearance) position.

1.Shut off engine and wait for all moving parts to stop.

2.Adjust skid plates by loosening the hex nuts, then mov- ing skid plate to desired position. Be sure both plates are adjusted evenly. Tighten securely.

HIGH POSITION

 

(LOW GROUND

 

CLEARANCE)

 

 

AUGER

 

HOUSING

 

SCRAPER BAR

HEX

SKID PLATE

NUTS

LOW POSITION (HIGH GROUND CLEARANCE)

FIG. 15

SCRAPER BAR (See Fig. 15)

The scraper bar is not adjustable, but is reversible. After considerable use it may become worn. When it has worn almost to the edge of the housing, it can be reversed, providing additional service before requiring replacement. Replace a damaged or worn scraper bar.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL (See Fig. 16)

The engine on your snow thrower has been shipped, from the factory, already filled with oil.

1.Check engine oil with snow thrower on level ground.

2.Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

To change engine oil, see “TO CHANGE ENGINE OIL” in the Maintenance section of this manual.

ADD GASOLINE (See Fig. 16)

Fill fuel tank to bottom of tank filler neck. Do not over- fill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

WARNING: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

CAUTION: Alcohol blended fuels (called gaso- hol or using ethanol or methanol) can attract moisture which leads to separation and forma- tion of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

CHOKE

ENGINE OIL

GASOLINE

CONTROL

FILL CAP / DIPSTICK

FILLER CAP

STARTER

BUTTON

PRIMER

RECOIL

 

SAFETY

STARTER

HANDLE

IGNITION

ON / OFF

KEY

SWITCH

 

NOTE: ALL ITEMS ARE SHOWN IN THEIR TYPICAL LOCATION. ACTUAL LOCATION MAY VARY WITH ENGINE ON YOUR UNIT.

FIG. 16

11

Page 11
Image 11
Poulan 96194000504 Before Starting the Engine, To Adjust Skid Plates See Fig, Scraper BAR See Fig, ADD Gasoline See Fig

96194000504 specifications

The Poulan 96194000504 is a powerful and versatile lawn mower designed to meet the needs of both homeowners and professional landscapers. Built for efficiency and ease of use, this model stands out in the crowded market of outdoor power equipment.

One of the main features of the Poulan 96194000504 is its robust engine. Equipped with a reliable gas engine, it offers high performance and durability, ensuring that it can tackle even the toughest mowing tasks. The engine is designed to deliver sufficient power to cut through thick grass and heavy vegetation, making it ideal for larger yards and commercial applications.

Another notable feature is its adjustable cutting height. The mower provides multiple cutting positions, allowing users to customize the grass length to their preference. This feature is particularly valuable as it accommodates different grass types and seasonal conditions, promoting healthier lawn care.

The Poulan 96194000504 also boasts a lightweight design, allowing for easy maneuverability around obstacles and in tight spaces. A comfort-grip handle enhances user experience by reducing fatigue during extended use. The mower's compact size makes it easy to transport and store, appealing to users with limited garage or shed space.

In addition, the mower incorporates advanced technology aimed at enhancing its performance. It features a reliable self-propelled system, which allows for effortless navigation across various terrains. This means less physical strain on the operator, especially on slopes or uneven ground.

The Poulan 96194000504 is designed with a robust deck that is built to withstand the elements and resist rust. Its durable construction ensures longevity, making it a wise investment for those seeking a long-lasting lawn care solution. With an included side discharge and mulching capability, this mower provides versatility in how the cut grass is handled, catering to different lawn care preferences.

Safety is also a priority in the design of the Poulan 96194000504, featuring safeguards to prevent accidental starts and minimize the risk of injury during operation. Overall, the Poulan 96194000504 combines power, technology, and ease of use, making it a top choice for anyone in need of an efficient lawn mower. With its user-friendly features and robust performance, it effectively meets the demands of maintaining a beautiful lawn.