SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or adjustments:

1.Be sure the on/off switch is in the OFF position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 17)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt and spacer. Install 1/4-20 lock nut and tighten securely.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

SPACER

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 17

TO REMOVE BELT COVER (See Fig. 18)

1.Remove the two screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared. To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come

in contact with spark plug.

15

 

FRAME

BELT COVER

SCREWS

FIG. 18

Page 15
Image 15
Poulan 96194000505 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

96194000505 specifications

The Poulan 96194000505 is a powerful and versatile lawn mower designed for homeowners seeking an efficient solution for maintaining their lawns. Known for its reliability and durability, this model is equipped with several features that make lawn care more manageable and enjoyable.

One of the standout characteristics of the Poulan 96194000505 is its potent engine. It typically features a 159cc engine, which provides ample power for handling both small and large yards. The engine is designed for efficient fuel consumption, enabling users to work longer on a single tank while minimizing environmental impact. This combination of power and efficiency ensures that mowing tasks are completed quickly and effectively.

The mower's cutting deck is another highlight. Generally constructed from robust materials, it has a cutting width of 21 inches, allowing for effective grass trimming even in tighter spaces. This size strikes a balance between maneuverability and coverage, ensuring users can navigate gardens with ease. The blade height can be adjusted through multiple settings, allowing homeowners to customize their lawn's appearance according to the season or personal preference.

The Poulan 96194000505 also incorporates advanced technologies that enhance performance and ease of use. The self-propelled feature is particularly beneficial for individuals who may find pushing a heavy mower challenging. With variable speed control, users can adjust the pace of mowing, ensuring maximum comfort during operation.

Ergonomically designed handles provide added convenience, reducing fatigue during extended use. The handles are often adjustable, allowing for a customized height that accommodates users of different statures. Additionally, many models come with a foldable handle, making storage more straightforward and space-saving.

The mower's bagging system is efficient, allowing for easy grass collection and disposal. Some variants may also feature mulching capabilities, returning nutrients to the soil, which can promote healthier lawn growth.

In summary, the Poulan 96194000505 is engineered for exceptional performance, featuring a robust engine, adjustable cutting deck, self-propulsion, and ergonomic design. Whether you have a small garden or extensive yard space, this mower delivers reliability and efficiency, making it a solid choice for maintaining your outdoor space. Its blend of technology and user-friendly characteristics ensures that lawn care can be done with ease and precision.