CONTROLS
4. By pass linkages
When pushing or pulling the mower, be sure to engage the EZT (Integraded Zeroturn Transaxle) bypass linkages. The EZT bypass linkages are located on the rear of the frame, below the rear engine guard.
•Raise the deck into the highest cutting position.
•Pull the EZT bypass linkages out and into the slots and release so that it is held in the bypass position.
•To reengage the EZT’s to drive, reverse the above procedure.
1.EZT Bypass linkage Bypass linkages
1.Head outside of rear deck
2.EZT Bypass linkage in bypass position Bypass position
