Poulan 532140600, C36C 10UPPER CHUTE See Figs. 10A & 10B No hardware required, Level Mower Deck

10UPPER CHUTE (See Figs. 10A & 10B) No hardware required

1.Lower mower deck to its lowest cutting position.

2.Assemble upper chute by inserting curved end into hole in back of cover.

NOTE: Handle carefully so as not to damage full bag indi- cator.

11WHEEL WEIGHTS (See Fig. 11) Use Hardware - - GROUP "H"

1.Assemble wheel weights and U-bolts onto the outside of front wheels and hold in position.

2.Fasten locknuts onto U-bolts on the inside of wheel and tighten securely.

3.Push in and turn upper chute until it is in line with lower chute.

4.Align the bosses on lower chute with alignment slots on upper chute and slide together.

5.Secure with rubber latch by hooking hole in latch over latch pin.

LOCKNUTS

FRONT WHEEL

WHEEL

WEIGHT

U-BOLT

	FULL BAGGER
UPPER	INDICATOR
	HANDLE
CHUTE

COVER

020 99 LOWER

CHUTE

FIG. 10A

ALIGNMENT

SLOTS

LATCH PIN

02098

RUBBER

LATCH

BOSSES

FIG. 10B

FIG. 11

12 LEVEL MOWER DECK

Be sure deck is properly leveled for best mower performance. See your tractors owner's manual for instructions.

10