2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Pull bulb holder out of the hole in the backside of the grill.

3.Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

4.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

Check wiring. See electrical wiring diagram in the Repair Parts section.

02614

Weak or Dead

Fully Charged

Battery

Battery

REPLACING BATTERY

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

1.Lift hood to raised position.

2.Remove terminal guard.

3.Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor.

4.Install new battery with terminals in same position as old battery.

5.Reinstall terminal guard.

6.First connect RED battery cable to positive (+) battery terminal with hex bolt and keps nut as shown. Tighten securely.

7.Connect BLACK grounding cable to negative (-) battery terminal with re- maining hex bolt and keps nut. Tighten securely

8.Close terminal access doors.

9.Close hood.

Keps Nut

Hex Bolt

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL AS- SEMBLY

1.Raise hood.

2.Unsnap headlight wire connector.

3.Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

4.When replacing hood, be sure to re- connect the headlight wire connector.

Hood

Headlight

Wire

Connector

02141

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be nec- essary. Check adjustment as described below before loosening cable. If adjust- ment is necessary, see engine manual

TO ADJUST CARBURETOR

The carburetor has been preset at the factory and adjustment should not be nec-

Terminal

Access

Door

Terminal

Guard

Positive (Red) Cable

Negative (Black)

Cable24

essary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load. If the carburetor does need adjustment, see engine manual.

Page 24
Image 24
Poulan CO1842STA manual To Adjust Carburetor

CO1842STA specifications

The Poulan CO1842STA is a highly regarded riding lawn mower known for its robust performance and user-friendly features, making it a favorite among homeowners looking to maintain their lawns efficiently. Designed for mid-sized residential properties, this riding mower combines power, reliability, and comfort, making yard work a more manageable task.

One of the main features of the Poulan CO1842STA is its 18.5 horsepower Briggs & Stratton engine, which provides ample power to tackle thick grass and uneven terrain. The engine is designed for easy starting and consistent performance. The mower features a 42-inch cutting deck, allowing users to cover a larger area in a shorter amount of time. This size strikes a balance between maneuverability and efficiency, enabling easy navigation around trees and garden beds.

The cutting deck's height can be adjusted easily, offering six different positions to cater to various mowing preferences and grass lengths. This flexibility ensures that users can achieve the desired lawn appearance without damaging the grass. Additionally, the mower features a side discharge, which allows for efficient grass clipping dispersal.

Technologically, the Poulan CO1842STA includes a foot-operated hydrostatic transmission, which simplifies speed control. By eliminating the need for manual shifting, users can focus on steering and cutting, enhancing their overall mowing experience. The mower also features a comfortable ergonomic seat, which is crucial for long mowing sessions, reducing user fatigue.

For added convenience, the Poulan CO1842STA is equipped with a turning radius that facilitates quick and easy maneuverability in tight spaces. This feature is especially beneficial for those with intricate landscaping or numerous obstacles in their yard.

Maintenance is straightforward with this model, as it comes with a deck wash port that allows for easy cleaning of the cutting deck, promoting optimal performance and extending the life of the mower. Overall, the Poulan CO1842STA presents an impressive combination of power, comfort, and ease of use, making it a strong choice for homeowners seeking dependable lawn care equipment. Whether tackling overgrown grass or maintaining a well-manicured lawn, this riding mower stands out as a reliable partner in yard maintenance.