OPERATION

DEPTH STAKE PIN “RELEASED” POSITION

“LOCKED”

POSITION

NUT “B”

 

OUTER

NUT “A”

SIDE SHIELD

 

FIG. 12

TURNING

•Release the drive control bar.

•Move throttle control to “SLOW” position.

•Place shift lever indicator in “F” (forward) position. Tines will not turn.

•Lift handle to raise tines out of ground.

•Swing the handle in the opposite direction you wish to turn, being careful to keep feet and legs away from tines.

•When you have completed your turn-around, release the drive control bar and lower handle. Place shift le- ver in (till) position and move throttle control to desired speed. To begin tilling, hold drive control bar against the handle.

CULTIVATING

•Use the forward rotating tine drive when cultivating, tilling soft ground or tilling pre-tilled soil.

•Release depth and drag stake pins. Lower drag stake. Pull the depth stake up for increased tilling depth. Place proper pin in hole of depth stake or drag stake to lock in position.

•Place shift lever indicator in forward rotating () till position .

•Hold the drive control bar against the handle to start tilling movement. Tines and wheels will both turn.

•Move throttle control "FAST" position for deep tilling. To cultivate, throttle control can be set at any desired speed, depending on how fast or slow you wish to cultivate.

•Always lower the drag stake when using the forward rotating tine drive.

OUTER SIDE SHIELDS (See Fig. 12)

The back edges of the outer side shields are slotted so that the shields can be raised for deep tilling and lowered for shallow tilling to protect small plants from being buried. Loosen nut “A” in slot and nut “B”. Move shield to desired position (both sides). Retighten nuts.

TO TRANSPORT

CAUTION: Beforeliftingortransporting, allow tiller engine and muffler to cool. Disconnect spark plug wire. Drain gasoline from fuel tank.

AROUND THE YARD

•Release the depth stake pin. Move the depth stake down to the top hole for transporting the tiller. Place depth stake pin in hole of depth stake to lock in posi- tion. This prevents tines from scuffing the ground.

•Place shift lever indicator in “F” (forward) position for transporting.

•Hold the drive control bar against the handle to start tiller movement. Tines will not turn.

•Move throttle control to desired speed.

AROUND TOWN

•Disconnect spark plug wire.

•Drain fuel tank.

•Transport in upright position to prevent oil leakage.

BEFORE STARTING ENGINE

IMPORTANT: BE VERY CAREFUL NOT TO ALLOW DIRT TO ENTER THE ENGINE WHEN CHECKING OR ADDING OIL OR FUEL. USE CLEAN OIL AND FUEL AND STORE IN APPROVED, CLEAN, COVERED CONTAINERS. USE CLEAN FILL FUNNELS.

CHECK ENGINE OIL LEVEL (See Fig. 13)

•The engine in your unit has been shipped, from the factory, already filled with SAE 30 summer weight oil.

•With engine level, clean area around oil filler plug and remove plug.

•Engine oil should be to point of overflowing when engine is level. For approximate capacity see “PRODUCT SPECIFICATIONS” on page 3 of this manual. All oil must meet A.P.I. Service Classification SG-SL.

•Reinstall engine oil cap and tighten.

•For cold weather operation you should change oil for easier starting (See oil viscosity chart in the Mainte- nance section of this manual).

•To change engine oil, see the Maintenance section in this manual.

OIL

LEVEL

FIG. 13

9

Page 8 Page 10
Page 9
Image 9
Poulan DRT875 manual Turning, Cultivating, To Transport, Before Starting Engine
Page 8 Page 10

DRT875 specifications

The Poulan DRT875 is a robust and versatile trimmer that stands out in the market for its impressive features and innovative technologies. This model is particularly designed for homeowners and landscaping professionals looking for efficiency and durability in a dependable gardening tool.

One of the main features of the Poulan DRT875 is its powerful 25cc 2-cycle engine. This engine provides ample power to tackle thick grass and weeds with ease, making it ideal for a variety of landscaping tasks. The DRT875 is equipped with an easy-start system that minimizes the effort required to get the trimmer up and running, reducing frustration and allowing users to spend more time working in their gardens.

The dual rotating tines are another defining characteristic of the Poulan DRT875. These tines have a working width of 17 inches, making quick work of areas that need trimming and cultivating. The dual-tine design enhances maneuverability and efficiency, ensuring that users can cover large areas in less time. Additionally, these tines are designed to penetrate the soil easily, allowing for effective aeration and weed control.

In terms of user comfort, Poulan has included several ergonomic features in the DRT875 design. The adjustable handle provides a customized grip, catering to different user heights and preferences. This feature not only makes the trimmer easier to handle but also minimizes fatigue during prolonged use.

The Poulan DRT875 is built with durability in mind. The construction materials are chosen to withstand various environmental conditions while maintaining peak performance. The overall design reflects a commitment to providing a reliable and long-lasting trimmer that will serve users well over the years.

Safety features are also a priority in the DRT875. The trimmer includes a protective guard that keeps debris away from the user, offering essential safety during operation. Furthermore, the low-vibration technology helps to reduce user fatigue during extended trimming sessions, allowing for a more comfortable experience.

In summary, the Poulan DRT875 combines power, efficiency, and comfort into an outstanding gardening tool. With its dependable 25cc engine, dual rotating tines, ergonomic design, and safety features, it meets the needs of both casual gardeners and professional landscapers alike. Whether you're maintaining your lawn or preparing flower beds, the DRT875 proves to be a worthy addition to any garden maintenance arsenal.
Top Page Image Contents