WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover or attempting to in- sert or remove the inlet restrictor, blower tube, or vacuum tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

WARNING: If received assembled, ensure your unit is properly assembled and all fasteners are secure.

S A standard screwdriver is required for assembly.

BLOWER ASSEMBLY

NOTE: Assembly instructions for using your unit as a vacuum follow this section.

Attaching the blower tube

If you have already assembled your unit for use as a vacuum, refer to the section

HOW TO CONVERT UNIT FROM VACUUM USE TO BLOWER USE.

To attach blower tube:

1.Align the grooves on the blower tube with the grooves on the blower outlet.

2.Push the blower tube onto the blower outlet until it snaps into place (tube is secured by red tube release button).

3.To remove the blower tube, press the tube release button while pulling on tube.

Tube Release Button

Blower Tube

Blower outlet

VACUUM ASSEMBLY

NOTE: Assembly instructions for using your unit as a blower are explained in the previous section.

If you have already assembled your unit for use as a blower, remove the blower tube.

Remove the inlet restrictor

An inlet restrictor is used when using your unit as a blower. This restrictor is not used during vacuum use and must be removed during assembly for vacuum use.

NOTE: Be sure to keep the inlet re- strictor for using your unit as a blower.

1.Ensure unit is stopped and extension cord is unplugged.

2.Open the inlet cover by inserting the tip of a screwdriver into the latch area on the blower unit. Gently tilt handle of screwdriver toward the front of the

unit to release the latch while pulling up on the vacuum inlet cover with your other hand.

Bottom view

Latch Area

of unit

 

 

 

Vacuum Inlet Cover (closed)

 

 

 

 

 

 

Impeller

Latch Area

 

 

 

 

 

 

 

 

 

Vacuum Inlet Cover (opened)

3.Turn the inlet restrictor counterclock- wise and remove it from the unit. Do not close the inlet door. You will next attach the vacuum tubes.

Vacuum

Inlet Cover

Inlet

Restrictor

Attaching the vacuum tubes

There are 2 vacuum tubes, an upper tube and a lower tube. The upper tube has a vacuum assist handle attached to one end and is cut straight on both ends. The upper tube attaches to the blower unit. The lower tube has an angled end that you point toward the ground during vacuum use. The lower tube attaches to the upper tube.

1.Ensure unit is stopped and exten- sion cord is unplugged.

2.While holding inlet cover open, place the hooks of the vacuum assist handle on the retaining posts of the unit.

3.Raise the tube until it is secured to the blower unit by the red inlet cover latch.

Upper Vacuum Tube Vacuum Assist Handle

Hook

Retaining Post

5

Page 4 Page 6
Page 5
Image 5
Poulan EBVM 215 instruction manual Standard screwdriver is required for assembly, Blower Assembly, Vacuum Assembly
Page 4 Page 6

EBVM 215 specifications

The Poulan EBVM 215 is a highly functional and versatile leaf blower designed for homeowners and landscaping professionals alike. This equipment is known for its exceptional performance, ease of use, and a variety of features that cater to different outdoor cleaning needs. It stands out in the market due to its thoughtful engineering and reliable performance.

One of the key features of the Poulan EBVM 215 is its powerful 25cc 2-cycle engine. This engine provides ample power to tackle even the most stubborn piles of leaves and debris while maintaining a manageable weight for the user. With its lightweight design, the blower allows for extended use without causing excessive fatigue, making it perfect for prolonged yard work or commercial landscaping tasks.

The Poulan EBVM 215 is equipped with a variable speed throttle, allowing users to easily adjust the blower speed according to their specific needs. This feature provides greater control when clearing out stubborn debris or maintaining delicate flower beds, ensuring that users have the versatility they require for any job.

In addition, the blower includes a unique vacuum feature that allows users to transition from blowing leaves to vacuuming them up with minimal effort. This dual functionality enhances its usability and makes it an excellent choice for those who want an all-in-one solution for yard maintenance.

Another highlight of the Poulan EBVM 215 is its ergonomic design. Featuring a comfortable handle with a cushioned grip, the blower is engineered for user comfort without compromising control. This ergonomic setup allows for better handling and maneuverability, which is crucial when working in tight spaces or navigating around garden beds.

The Poulan EBVM 215 also emphasizes ease of maintenance with its simple assembly and straightforward maintenance procedures. This user-friendly approach ensures that both novice and experienced users can keep their equipment in top condition with minimal hassle.

In terms of noise reduction, the blower has been designed with a lower emission engine, which not only complies with environmental regulations but also helps reduce the noise typically associated with gas-powered blowers. This feature is particularly beneficial for residential areas where noise control is appreciated.

Overall, the Poulan EBVM 215 combines power, versatility, and user-centered design, making it a strong contender in the home and garden tool market. Its innovative features and reliable performance genuinely elevate the standard for leaf blowers, positioning it as a valuable addition to any outdoor maintenance arsenal.
Top Page Image Contents