WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

DANGER: THIS POWER TOOL CAN

BE DANGEROUS! This unit can cause serious injury including amputation or blindness to the operator and others. The warnings and safety instructions in this manual must be followed to provide reasonable safety and efficiency in us- ing this unit. The operator is responsible for fol- lowing the warnings and instructions in this manual and on the unit. Never allow children to use this tool.

KNOW YOUR UNIT

SRead your instruction manual carefully until you completely understand and can follow all warnings and safety rules before operat-

ing the unit.

DRestrict unit to users who understand and will follow all warnings and safety rules in this manual and on the unit.

PLAN AHEAD

WARNING: Inspect area before start- ing unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can rico- chet, be thrown, or otherwise cause injury or damage during operation.

DAlways wear eye protection when operating, servicing, or performing maintenance on unit. Wearing eye protection will help to prevent brush or debris from being thrown or ricochet- ing into eyes and face which can result in blindness and/or serious injury. Eye protec-

tion should be marked Z87.

D Wear hearing protection when using this unit.

DSecure hair above shoulder length. Secure or remove jewelry, loose clothing, or cloth- ing with loosely hanging straps, ties, tas- sels, etc. They can be caught in moving parts.

DStay alert. Do not operate unit when you are tired, ill, upset, or if you are under the influence

of alcohol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 m) when starting or operating unit.

HANDLE FUEL WITH CAUTION

DEliminate all sources of sparks or flame (in- cluding smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored.

DMix and pour fuel in an outdoor area; store fuel in a cool, dry, well ventilated place; use an approved, marked container for all fuel

purposes.

DDo not smoke while handling fuel or while operating the unit.

DDo not fill fuel tank while engine is running. D Make sure the unit is properly assembled

and in good operating condition.

DAvoid spilling fuel or oil. Wipe up fuel spills before starting the engine.

DMove at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE--Blade

moves momentarily after the trigger is re- leased. Do not attempt to clear away cut ma- terial when the blade is in motion. Make sure the switch is in the OFF position, the spark plug wire is disconnected, and the blade has stopped moving before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade.

D Inspect unit before each use for worn, loose, missing, or damaged parts. Do not use until unit is in proper working order.

D Keep outside surfaces free from oil and fuel.

D Never start or run engine inside a closed room or building. Breathing exhaust fumes can kill.

DAvoid dangerous environments. Do not use in unventilated areas or where explosive vapors or carbon monoxide build up could

be present.

DDo not overreach or use from unstable sur- faces such as ladders, trees, steep slopes, rooftops, etc. Keep firm footing and balance at all times.

DDo not raise unit above your shoulders; the cutting blade can come dangerously close

to your body.

DAlways keep unit in front of your body. Keep all parts of your body away from the cutting

blade.

D Keep the cutting blade and air vents free from debris.

DUse only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

D Have all maintenance other than the rec- ommended procedures described in the in- struction manual performed by an autho- rized service dealer.

D Disconnect spark plug before performing maintenance except for carburetor adjust- ments.

D Do not use a cutting blade that is bent, warped, cracked, broken, or damaged in any other way. Have worn or damaged parts replaced by an authorized service dealer.

DUse only recommended Weed Eater! cut- ting blades and replacement parts; use of any other parts may void your warranty and cause damage to your unit.

DEmpty fuel tank before storing the unit. Use up fuel left in carburetor by starting engine and

letting it run until it stops.

DHand carry the unit with the engine stopped and the muffler and cutting blade away from your body.

DAllow engine to cool, empty the fuel tank, and secure the unit before storing or trans- porting it in a vehicle.

-- 2 --

Page 1 Page 3
Page 2
Image 2
Poulan GHT 220 LE, GHT 180 LE Know Your Unit, Plan Ahead, Handle Fuel with Caution, Operate Your Unit Safely
Page 1 Page 3

GHT 180 LE, GHT 220 LE specifications

The Poulan GHT 220 LE and GHT 180 LE are powerful, reliable hedge trimmers designed for home gardeners and professionals alike, blending ease of use with superior performance. These models from Poulan's reputable line of outdoor power equipment are built to tackle a wide range of trimming tasks, making them valuable tools in the landscape maintenance arsenal.

Starting with the GHT 220 LE, it boasts a robust 22-inch double-sided blade that efficiently cuts through thick shrubs and hedges. The dual-action blade design minimizes vibrations and provides a smoother cutting action, resulting in a cleaner finish with less effort. Its ergonomic handle, coupled with lightweight design, ensures comfortable operation over extended periods, reducing fatigue and increasing productivity. The GHT 220 LE is equipped with a 20V lithium-ion battery, offering ample power and extended run-time, which means fewer interruptions during your landscaping jobs.

On the other hand, the Poulan GHT 180 LE is ideal for homeowners seeking a more compact yet effective tool. With an 18-inch blade length, it strikes a perfect balance between portability and cutting capability. The GHT 180 LE also features a dual-action cutting blade, which ensures precise and clean cuts while minimizing vibration. It operates on a user-friendly 18V battery, making it effortless to handle without being tethered to a power source.

Both models are equipped with several innovative features aimed at enhancing user experience. The soft-grip handle design allows for better control and comfort, especially for prolonged use. They also come with built-in safety features, including blade guards and a safety switch, ensuring that accidental starts are prevented. Their lightweight and balanced construction helps maneuver the hedge trimmers easily, even in tight spaces or awkward angles.

In terms of technology, Poulan emphasizes efficiency and performance. The brushless motor technology in these models means less maintenance over time while offering a longer lifespan compared to traditional motors. Additionally, the battery life indicator is a particularly useful feature, allowing users to monitor battery levels clearly and plan their tasks accordingly.

In conclusion, both the Poulan GHT 220 LE and GHT 180 LE hedge trimmers embody the perfect combination of power, technology, and user-friendly design. Whether you are a casual homeowner or a seasoned landscaper, these tools are designed to make hedge trimming a straightforward and enjoyable task.
Top Page Image Contents