SERVICE AND ADJUSTMENTS

While holding motion control lever in place, loosen the adjustment bolt.

Move motion control lever to the neutral (N) (lock gate) position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

Loosen the adjustment bolt.

Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

Tighten adjustment bolt securely.

Start engine and test.

If tractor still creeps, repeat above steps until satis- fied.

MOTION CONTROL

NEUTRAL

LEVER

LOCK GATE

 

ADJUSTMENT

BOLT

FIG. 22

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See“PURGETRANSMISSION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor.If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 23)

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 23

TO START ENGINE WITH A WEAK BATTERY (See Fig. 24)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE sec- tion of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

FIG. 24

22

Page 22
Image 22
Poulan HD21H42 manual Transmission REMOVAL/REPLACEMENT, To Adjust Steering Wheel ALIGN- Ment, Front Wheel TOE-IN/CAMBER

HD21H42 specifications

The Poulan HD21H42 lawn tractor is a powerful and versatile lawn care machine, designed to meet the needs of homeowners with medium to large-sized lawns. This tractor is equipped with a robust 21 horsepower Briggs & Stratton engine, providing the ideal balance between power and efficiency. Its reliable engine ensures smooth operation while delivering ample torque for tackling various terrains and grass conditions.

One of the standout features of the HD21H42 is its 42-inch cutting deck, which allows for efficient mowing of larger areas. The deck is designed with a durable steel construction, ensuring longevity and resistance to wear and tear. The cutting height is adjustable, offering a range of settings that cater to different grass types and seasonal growth patterns. This adaptability is crucial for achieving a perfectly manicured lawn.

The Poulan HD21H42 also incorporates an advanced hydrostatic transmission system. This technology allows for an effortless driving experience, offering infinite speed control without the need for shifting gears. Users can easily maneuver around obstacles and navigate tight spaces with confidence, significantly enhancing the tractor's usability.

Comfort is another key characteristic of the Poulan HD21H42. The tractor features an ergonomic seat that provides support during long mowing sessions, along with a high backrest for added comfort. The straightforward control panel simplifies operation, enabling users to focus on their mowing tasks without confusion. Additionally, the tractor's tight turning radius helps in making sharp turns, reducing the need for manual adjustments.

Maintenance is straightforward with the HD21H42, as its removable cutting deck makes it easy to access and clean. Regular maintenance routines contribute to prolonging the lifespan of the machine and ensuring consistent performance over time.

Moreover, the Poulan HD21H42 offers enhanced versatility with optional attachments such as mulching kits, baggers, and snow plows. This allows homeowners to extend the utility of their lawn tractor throughout different seasons, adapting it to varied tasks beyond just mowing.

In conclusion, the Poulan HD21H42 lawn tractor combines power, ease of use, and adaptability, making it an excellent choice for homeowners seeking a reliable lawn maintenance solution. Its advanced features and thoughtful design ensure that mowing the lawn is not only an obligation but a satisfying and efficient task.