SAFETY RULES

SAFE OPERATION PRACTICES FOR WALK-BEHIND POWERED ROTARY TILLERS

TRAINING

Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

WARNING

The engine exhaust from this product con- tains chemicals known to the State of Cali- fornia to cause cancer, birth defects, or other reproductive harm.

2

Page 2
Image 2
Poulan HDF550L owner manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

HDF550L specifications

The Poulan HDF550L is a versatile and powerful handheld string trimmer designed for homeowners and professional landscapers alike. Engineered for efficiency and usability, this tool combines advanced technology with user-friendly features, making yard maintenance a breeze.

One of the standout features of the HDF550L is its robust 50cc, 2-cycle engine. This powerful engine provides ample torque and speed, enabling users to tackle thick grass, weeds, and overgrown areas with ease. The engine's design prioritizes fuel efficiency and reduced emissions, adhering to environmental standards while allowing for extended use without frequent refueling.

The HDF550L is equipped with a dual-line bump feed head, which allows for quick line adjustments during operation. This feature eliminates the need for complex line replacement procedures, saving users valuable time. The trimmer's .095-inch line thickness ensures optimal performance, cutting through tough vegetation smoothly and effectively.

Another significant characteristic of the Poulan HDF550L is its lightweight construction, weighing in at just under 12 pounds. This design enhances maneuverability, allowing users to navigate around garden beds, trees, and other obstacles effortlessly. The adjustable straight shaft provides additional reach and comfort, making it suitable for both tall and short users.

To enhance user experience, the HDF550L incorporates an ergonomic handle with a soft grip. This reduces fatigue during prolonged use, ensuring that users can maintain their trimming tasks without discomfort. Moreover, the integrated anti-vibration technology minimizes vibrations transmitted to the operator's arms, making extended operation smoother and more enjoyable.

The Poulan HDF550L also features easy-start technology, which simplifies the ignition process. With just a few pulls, users can get the trimmer up and running, reducing frustration during those busy lawn care days. This technology is especially beneficial for novice users who may struggle with starting traditional 2-cycle engines.

In summary, the Poulan HDF550L is a powerful and efficient string trimmer, ideal for tackling a wide range of landscaping tasks. Its combination of a powerful engine, user-friendly features, and lightweight design makes it a top choice for anyone looking to maintain their yard in pristine condition. Whether you're battling overgrown weeds or maintaining perfectly trimmed borders, the HDF550L provides the reliability and performance needed to get the job done efficiently.