SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Owner’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product con- tains chemicals known to the State of Cali- fornia to cause cancer, birth defects, or other reproductive harm.

2

Page 2
Image 2
Poulan HDF825X manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

HDF825X specifications

The Poulan HDF825X is a reliable and efficient lawn mower designed for homeowners seeking an exceptional mowing experience. This machine combines robust features and innovative technology, making it a top choice for residential landscaping needs.

One of the standout characteristics of the Poulan HDF825X is its powerful 8.5 horsepower engine, providing sufficient power to tackle even the most challenging grass types. This reliable engine ensures consistent performance while mowing through thick patches of grass and uneven terrains.

The mower is equipped with a 25-inch cutting deck, which strikes a balance between maneuverability and coverage. This width allows users to cover a substantial area with each pass while maintaining the ability to navigate tight spaces and intricate landscaping designs. The cutting deck also features adjustable height settings, enabling users to achieve their desired grass length effortlessly.

A significant feature of the HDF825X is its innovative dual cutting blade system. This technology ensures a clean, even cut, promoting healthier grass growth. The blades can be easily removed for sharpening or replacement, contributing to the mower's longevity and performance over time.

The Poulan HDF825X also highlights user-friendly ergonomics. Its adjustable handle provides comfort to users of varying heights, making mowing less strenuous. The integrated safety features, such as the blade brake, enhance user protection by stopping the blades quickly when the operator releases the handle.

For convenience, this lawn mower is equipped with a sizable grass catcher that minimizes the need for frequent emptying while mowing. The catcher is easy to detach, allowing for swift disposal of clippings.

Another critical aspect of the HDF825X is its durable construction. Built with high-quality materials, the mower is designed to withstand the rigors of regular use while maintaining its performance. The robust wheels provide excellent traction on diverse terrains, enhancing overall maneuverability.

In summary, the Poulan HDF825X offers a well-rounded set of features that cater to the demands of modern lawn care. From its powerful engine and innovative cutting technology to user-friendly design, this lawn mower is an excellent investment for anyone striving for a well-groomed lawn. Whether tackling small patches or larger areas, the Poulan HDF825X delivers on efficiency and consistency, making it a reliable companion in lawn maintenance.