STORAGE

Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more.

CAUTION: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TILLER

•Clean entire tiller (See “CLEANING”in the Maintenance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

FUEL SYSTEM

IMPORTANT:IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS THE CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADSTO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent.

NOTE: Fuel stablizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stablizer container. Run engine at least 10 minutes after adding stablizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug.

•Pour 1 ounce (29 ml) of oil through spark plug hole into cylinder.

•Pull starter handle slowly several times to distribute oil.

•Replace with new spark plug.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to give protection from dust and dirt.

•Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVER TILLER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

19

Page 18 Page 20
Page 19
Image 19
Poulan MRT500 owner manual Storage, Other, Fuel System, Engine OIL, Cylinders
Page 18 Page 20

MRT500 specifications

The Poulan MRT500 is a versatile and powerful addition to the Poulan line of outdoor equipment, designed to meet the diverse needs of homeowners and landscaping professionals alike. This robust machine is primarily engineered for those tackling tougher yard tasks, such as tilling, cultivating, and preparing garden beds for planting.

At the heart of the MRT500 is a reliable engine that delivers outstanding performance. Featuring a 500cc four-stroke engine, it provides ample power for various gardening applications. This engine is designed for fuel efficiency, ensuring longer runtimes and reduced emissions while maintaining high torque levels needed for breaking up tough soil. The MRT500 also incorporates an easy-start mechanism, allowing users to get to work without the frustration of cumbersome starting procedures.

One of the standout characteristics of the MRT500 is its adjustable tilling width, which can be modified to suit different gardening needs. This flexibility allows users to till narrow rows for small gardens or wider paths for larger landscapes, making it an excellent choice for both casual gardeners and serious landscapers. The tilling depth can also be adjusted, ensuring maximum soil aeration and preparation, which is crucial for successful planting.

The machine is equipped with durable and robust tines that are designed to penetrate a variety of soil types, enabling effective tilling whether in clay, sandy, or loamy conditions. The tines can withstand the rigors of heavy use, ensuring longevity and performance consistency throughout the season.

In terms of user comfort, the MRT500 features ergonomic handles that are adjustable for height, making it suitable for users of varying stature. This focus on user experience reduces strain during operation, which is especially beneficial during extended work sessions. The lightweight design of the machine also allows for easy maneuverability, making it practical for both tight spaces and larger areas.

Additional features include a compact design for easy storage and transportation, as well as a straightforward assembly process, allowing users to set up the MRT500 quickly. With its combination of power, versatility, and user-friendly design, the Poulan MRT500 is an invaluable tool for any landscaping enthusiast or professional, ready to tackle a range of gardening projects with ease and efficiency. Whether preparing a new garden or maintaining an existing one, this tiller is sure to impress with its performance and reliability.
Top Page Image Contents