THROTTLE LOCK-OUT

 

 

CHAIN BRAKE

 

 

The THROTTLE LOCK--OUT must be

The chain brake is a device designed to stop

pressed before you can squeeze the throttle

the chain if kickback occurs. The chain brake

trigger. This feature prevents you from acci-

activates automatically in the event of kick-

dentally squeezing the trigger.

 

 

back. The chain brake activates manually if the

CHOKE/FAST IDLE LEVER

front hand guard is pushed forward. The chain

The choke and fast idle are set by pulling the

brake is disengaged by pulling the front hand

guard back toward the front handle as far as

CHOKE/FAST IDLE LEVER out to the full ex-

possible.

 

 

tent for cold starting or after refueling. The

 

 

 

 

 

choke provides additional fuel to the engine

CHAIN TENSION

 

 

during cold starting.

 

 

It is normal for a new chain to stretch during the

PRIMER BULB

 

 

first 15 minutes of operation. You should check

The PRIMER BULB circulates fuel to the car-

your chain tension frequently. See CHAIN

buretor to provide quicker starting.

TENSION under the ASSEMBLY section.

 

 

 

 

 

 

 

 

WARNING: Muffler is very hot dur-

In freezing weather oil will thicken, making it

necessary to thin bar and chain oil with a

ing and after use. Do not touch the muffler or

small amount (5 to 10%) of #1 Diesel Fuel or

allow combustible material such as dry

kerosene. Bar and chain oil must be free

grass or fuel to do so.

 

 

flowing for the oil system to pump enough oil

BEFORE STARTING ENGINE

for adequate lubrication.

 

 

 

 

 

 

Genuine Poulan bar and chain oil is recom-

WARNING: Be sure to read the fuel

mended to protect your unit against exces-

handling information in the safety rules sec-

sive wear from heat and friction. Poulan

oil

resists high temperature thinning.

 

 

tion of this manual before you begin. If you do

 

 

If Poulan bar and chain oil is not available,

not understand the fuel handling information

do not attempt to fuel your unit. Seek help

use a good grade SAE 30 oil.

 

 

from someone that does understand the in-

S Never use waste oil for bar and chain lubri-

formation or call the customer assistance

cation.

 

 

help line at 1-800-554-6723.

 

 

S Always stop the engine before removing

FUELING ENGINE

 

 

the oil cap.

 

 

WARNING: Remove fuel cap slow-

IMPORTANT

 

 

Experience indicates that alcohol--blended

ly when refueling.

 

 

fuels (called gasohol or using ethanol or meth-

 

HELPFUL TIP

 

anol) can attract moisture which leads to sepa-

 

 

ration and formation of acids during storage.

 

To obtain the correct oil mix

 

Acidic gas can damage the fuel system of an

 

ratio, pour 3.2 ounces of

 

engine while in storage. To avoid engine prob-

 

2-cycle synthetic oil into

 

lems, the fuel system should be emptied before

 

one gallon of fresh gas.

 

storage for 30 days or longer. Drain the gas

This engine is certified to operate on unleaded

 

tank, start the engine and let it run until the fuel

gasoline. Before operation, gasoline must be

lines and carburetor are empty. Use fresh fuel

mixed with a good quality synthetic 2-cycle air-

next season. See STORAGE section for addi-

cooled engine oil designed to be mixed at a ra-

tional information.

 

 

tio of 40:1. Poulan/WEED EATER brand syn-

CHAIN BRAKE

 

 

thetic

oil is recommended.

A 40:1 ratio is

Ensure chain brake is disengaged by pulling

obtained by mixing 3.2 ounces (95 ml) of oil

the front hand guard back toward the front han-

with 1 gallon (4 liters) of unleaded gasoline.

dle as far as possible. The chain brake must be

Included with this saw is a 3.2 ounce (95 ml)

disengaged before cutting with the saw.

 

 

container of Poulan/WEED EATER brand syn-

 

 

 

thetic

oil. Pour the entire contents of this con-

WARNING: The chain must not

tainer

into 1 gallon (4 liters)

of gasoline to

move when the engine runs at idle speed. If

achieve the proper fuel mixture. DO NOT USE

the chain moves at idle speed refer to CAR-

automotive or marine oil. These oils will

BURETOR ADJUSTMENT within

this

cause engine damage. When mixing fuel fol-

manual. Avoid contact with the muffler. A hot

low the instructions printed on the container.

muffler can cause serious burns.

 

 

Always read and follow the safety rules listed

 

 

 

 

 

under HANDLE FUEL WITH CAUTION.

To stop the engine move the ON/STOP

BAR AND CHAIN LUBRICATION

switch to the STOP position.

 

 

The bar and chain require continuous lubri-

 

 

 

cation. Lubrication is provided by the auto-

To start the engine hold the saw firmly on the

matic oiler system when the oil tank is kept

ground as illustrated. Make sure the chain is

filled. Lack of oil will quickly ruin the bar and

free to turn without contacting any object.

chain. Too little oil will cause overheating

 

shown by smoke coming from the chain and/

 

or discoloration of the bar.

 

9

Page 8 Page 10
Page 9
Image 9
Poulan P4018 P4018WM, P4018WT Throttle LOCK-OUT Chain Brake, CHOKE/FAST Idle Lever, Primer Bulb, Before Starting Engine
Page 8 Page 10

P4018 P4018WM, P3516PR, P4018WT, P3314WS, P3818AV P4018AV specifications

The Poulan brand has established itself as a reliable name in outdoor power equipment, particularly with its diverse range of chainsaws designed for various cutting needs. The models P4018AV BH, P3314WSA, P3416, P3818AV, P4018AV, P3314WS, and P4018WT offer users cutting-edge technology and features tailored for efficiency, durability, and ease of use.

The P4018AV BH is a standout model featuring a powerful 40cc, 2-cycle engine that delivers robust cutting performance. Equipped with an anti-vibe handle system, it minimizes user fatigue during extended use. Its 18-inch cutting bar increases the cutting capacity, making it suitable for larger trees and branches. The tool-less chain tensioning system allows for quick adjustments, ensuring optimal performance without the need for additional tools.

The P3314WSA offers a 33cc engine, making it a lightweight option for casual users. This model is particularly suitable for homeowners and novice users who require a dependable chainsaw for light to moderate cutting tasks. The 14-inch guide bar provides excellent maneuverability, while the automatic oiler ensures continuous lubrication of the chain for smoother operation.

Moving to the P3416, this chainsaw is well-balanced and powered by a 34cc engine. With a 16-inch cutting bar, it strikes a perfect balance between power and portability, making it ideal for pruning and small to medium tree felling. The high visibility wrap handle provides extra comfort and control during operation.

The P3818AV further enhances user experience with its advanced anti-vibration technology, which significantly reduces the vibrations felt through the handles. This model features an 18-inch guide bar, making it versatile for various cutting tasks, from firewood to storm cleanup.

The P4018AV and P4018WT bring additional power to the table. The P4018AV has a similar engine and features to the BH model but in a different configuration, while the P4018WT is designed for tougher jobs with a fully-wrapped handle for improved grip and handling. The rugged construction of both models ensures they can withstand rigorous use in demanding environments.

Together, these Poulan chainsaws provide a range of features that cater to different needs—from light gardening projects to heavy-duty logging tasks. With a combination of power, ergonomic design, and innovative technology, Poulan chainsaws stand out as reliable tools for outdoor enthusiasts and professionals alike.
Top Page Image Contents