SERVICE AND ADJUSTMENTS

SIDE-TO-SIDE ADJUSTMENT (See Figs. 16 and 17)

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjustment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Three full turns of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjusting.

BOTTOM EDGE OF

 

BOTTOM EDGE

MOWER

 

OF MOWER

TO GROUND

 

TO GROUND

“A”

GROUND LINE

“A”

 

FIG. 16

 

SUSPENSION ARM

LIFT LINK ADJUSTMENT NUT

FIG. 17

FRONT-TO-BACK ADJUSTMENT (See Figs. 18 and 19)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its high- est position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

• Before making any necessary adjustments, check that both front links are equal in length.

• If links are not equal in length, adjust one link to same length as other link.

• To lower front of mower loosen nut “E” on both front links an equal number of turns.

• When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

• To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns. The two front links must remain equal in length.

• When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

• Recheck side-to-side adjustment.

20

MANDREL

"D"

"D"

FIG. 18

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT "F"

NUT "E"

TRUNNION

 

FRONT LINKS

FIG. 19

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 20)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Install new belt in reverse order of removal.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower in reverse order of removal instruc- tions.

MANDREL

IDLER

PULLEY

PULLEYS

MANDREL

 

PULLEY

 

FIG. 20

Page 19 Page 21
Page 20
Image 20
Poulan PB175H42LT manual To Replace Mower Blade Drive Belt See Fig, Belt Removal, Belt Installation
Page 19 Page 21

PB175H42LT specifications

The Poulan PB175H42LT is a robust lawn tractor designed for homeowners seeking an efficient and reliable solution for lawn maintenance. With a focus on power, comfort, and versatility, this model stands out as a great option for handling a variety of mowing tasks.

One of the key features of the PB175H42LT is its powerful 17.5 HP Briggs & Stratton engine. This engine offers reliable starting and performance, making it suitable for tackling both small and large yards. The automatic hydrostatic transmission enhances the driving experience by providing a smooth and effortless change of speed without the need for shifting gears. This means users can focus more on mowing rather than managing complicated controls.

The 42-inch cutting deck of the Poulan PB175H42LT is designed for efficiency and precision. With its three-blade system, it delivers an even and clean cut, reducing the number of passes needed to achieve a well-manicured lawn. The deck is also adjustable, allowing users to set their desired cutting height between 1.5 to 4 inches, catering to various grass types and preferences.

Comfort is a priority with the PB175H42LT, which features a comfortable high back seat and easy-to-reach controls. The tractor's design also includes a tight turning radius, making it easy to navigate around flower beds and trees. Additionally, the generous legroom and ergonomic layout ensure that users can operate the tractor for extended periods without discomfort.

The Poulan PB175H42LT incorporates several technologies that enhance its functionality. For example, the Easy Start technology allows for quick engine ignition, so users can get started with their mowing tasks without delay. The integrated mulching capability provides added versatility, enabling homeowners to fertilize their lawns naturally while maintaining a tidy appearance.

Durability is another hallmark of the Poulan brand, and the PB175H42LT is built to last. Its heavy-duty construction ensures that the tractor can withstand regular use and varying conditions, making it a solid investment for any homeowner.

In summary, the Poulan PB175H42LT is a well-designed lawn tractor that combines power, comfort, and advanced features. Its reliable engine, adjustable cutting deck, and user-friendly controls make it an excellent choice for maintaining a beautiful lawn with ease. Whether tackling tough weeds or managing routine mowing, this model delivers the performance and reliability homeowners need.
Top Page Image Contents