MAINTENANCE

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

BLADE

5/8" BOLT OR PIN

FIG. 9

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

Disconnect BLACK battery cable first then RED bat- tery cable and remove battery from tractor.

Rinse the battery with plain water and dry.

Clean terminals and battery cable ends with wire brush until bright.

Coat terminals with grease or petroleum jelly.

Reinstall battery (See “REPLACING BATTERY” in the Service and Adjustment section of this manual).

V-BELTS

CheckV-belts for deterioration and wear after 100 hours and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

5W-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

 

 

30 32 40

 

60

80

100

C

-30

-20

-10

0

10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oil_visc_chart1_e

FIG. 10

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tractor is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 10 and 11)

Determine temperature range expected before oil change. All oil must meet API service classification SG-SL.

Be sure tractor is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

Remove yellow cap from end of drain valve and install the drain tube onto the fitting.

 

OIL DRAIN VALVE

CLOSED

 

AND

 

LOCKED

 

POSITION

 

YELLOW CAP

DRAIN

TUBE

 

FIG. 11

• Unlock drain valve by pushing inward and turning counterclockwise.

• To open, pull out on the drain valve.

• After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

• Remove the drain tube and replace the cap onto to the bottom fitting of the drain valve.

• Refill engine with oil through oil fill dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this man- ual.

• Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.Tighten cap

17

onto the tube securely when finished.

Page 17
Image 17
Poulan PD17542LT manual Engine, Battery, Belts, Transaxle Cooling, Lubrication

PD17542LT specifications

The Poulan PD17542LT is a robust and reliable lawn tractor designed for homeowners seeking an efficient solution for lawn care. With a focus on performance and user-friendliness, this machine features a powerful 175cc engine that delivers the necessary torque and cutting power needed to tackle various grass types and terrains.

One of the standout features of the PD17542LT is its 42-inch cutting deck. This size strikes a perfect balance between maneuverability and coverage, allowing users to navigate through tighter spaces while also making quick work of larger lawns. The deck is constructed from durable materials, ensuring it can withstand the rigors of regular mowing season after season.

The tractor offers a six-position cutting height adjustment, which allows users to select their desired grass length easily. Whether you prefer a manicured look or a more natural longer lawn, this feature adds to the versatility of the PD17542LT, accommodating different types of grass and user preferences.

Poulan has incorporated several technologies into the PD17542LT that enhance overall performance and user experience. The automatic choke system simplifies starting the engine, eliminating the hassle of manual choke adjustments. This system is particularly appreciated by those who may not be as experienced in starting small engines.

Another key characteristic of this lawn tractor is its comfortable operator station. The ergonomically designed seat provides ample support for extended periods of use, making it ideal for larger lawns that require more time to mow. The easy-to-reach controls are strategically placed, allowing users to adjust settings without having to take their hands off the wheel, ensuring a safer operation.

The compact design of the PD17542LT also allows for easy storage, fitting neatly into garages or sheds when not in use. Its high traction rear tires provide excellent grip on various terrains, ensuring that it can handle slopes and uneven ground effectively.

Overall, the Poulan PD17542LT lawn tractor is an excellent choice for homeowners looking for a reliable, feature-rich machine that provides both ease of use and effective lawn maintenance. With its powerful engine, durable construction, and user-oriented features, it stands out as a practical investment for those dedicated to keeping their gardens and yards in top condition.