OPERATION

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT LIFT LE-

VER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 6

TO OPERATE ON HILLS

TO TRANSPORT

Raise attachment lift to highest position with attachment lift control.

When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Maintenance section of this manual).

To change engine oil, see the Maintenance section in this manual.

ADD GASOLINE

Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

• Choose the slowest speed before starting up or down hills.

• Avoid stopping or changing speed on hills.

• If slowing is necessary, move throttle control lever to slower position.

• If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

• Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

• To restart movement, slowly release parking brake and clutch/brake pedal.

• Make all turns slowly.

12

CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

Page 12
Image 12
Poulan PO13T38A manual Before Starting the Engine, To Operate on Hills To Transport, Towing Carts and Other ATTACH- Ments

PO13T38A specifications

The Poulan PO13T38A lawn tractor is a remarkable machine designed to cater to the needs of homeowners seeking a reliable, efficient, and user-friendly mowing solution. This versatile tractor stands out in the crowded market of lawn care equipment due to its combination of robust features and advanced technologies.

One of the standout characteristics of the Poulan PO13T38A is its powerful 13.5 horsepower Briggs & Stratton engine. This engine provides ample power for tackling various lawn sizes, ensuring that even challenging terrains can be managed with ease. The automatic transmission adds to the convenience, allowing users to smoothly shift between speeds without the need for manual gear changes. This feature not only enhances the mowing experience but also reduces operator fatigue during longer mowing sessions.

The cutting deck of the PO13T38A measures 38 inches, making it suitable for medium-sized yards. It offers a 3-in-1 mowing capability, allowing users to choose between side discharge, mulching, or bagging modes. This versatility ensures that lawn clippings can be managed in a way that best suits individual preferences and lawn care needs. The adjustable cutting height, with several positions to choose from, further allows users to customize the length of their grass, promoting a healthy lawn appearance.

Another notable feature is the ease of operation. The Poulan PO13T38A is equipped with an ergonomic steering wheel and a comfortable seat, providing excellent control and comfort for the operator. The compact design of the tractor makes it highly maneuverable, ideal for navigating around obstacles such as trees and flower beds.

In terms of maintenance, the tractor is designed for user-friendliness. The easy-access oil drain feature simplifies engine maintenance, while the durable construction ensures longevity and reliability over time. Safety features like durable chassis and low center of gravity enhance stability, providing peace of mind even on slopes.

Overall, the Poulan PO13T38A lawn tractor represents a blend of power, efficiency, and comfort. With its user-friendly controls, versatile cutting options, and robust build quality, it caters perfectly to homeowners looking to maintain their lawns with ease and effectiveness. Whether it's a small garden or a medium-sized yard, this tractor proves to be a valuable partner in lawn care.