CUSTOMER RESPONSIBILITIES

TRACTOR

Always observe safety rules when performing any mainte- nance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 9)

•Raise mower to highest position to allow access to blades.

•Remove hex bolt, lock washer and flat washer securing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

•Reassemble hex bolt, lock washer and flat washer in exact order as shown.

•Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

TRAILING

MANDREL

ASSEMBLY

EDGE UP

 

 

CENTER

 

HOLE

LOCK WASHER

STAR

BLADE

FLAT WASHER

HEX BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 9

TO SHARPEN BLADE (See Fig. 10)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and even- tual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer).

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT

BLADE

OR PIN

 

FIG. 10

15

Page 14 Page 16
Page 15
Image 15
Poulan PO14542B owner manual Tractor, Brake Operation, Tires, Operator Presence System, Blade Care
Page 14 Page 16

PO14542B specifications

The Poulan PO14542B is a robust lawn mower designed to provide efficient cutting performance with user-friendly features. Ideal for homeowners with medium to large yards, this mower effectively combines power, durability, and convenience, making it a popular choice in the landscaping segment.

One of the most notable features of the Poulan PO14542B is its powerful engine. Equipped with a reliable 14.5 HP Briggs & Stratton engine, it delivers ample power to tackle even the toughest grass conditions. This engine provides the necessary torque to ensure consistent cutting performance, allowing users to mow through thick grass without bogging down.

A significant aspect of the Poulan PO14542B is its cutting deck, which measures 42 inches wide. This size strikes a perfect balance between maneuverability and mowing capacity, allowing users to cover more ground in less time. The deck features a durable construction that ensures longevity and performance. Additionally, it provides a 6-position manual height adjustment system, enabling users to customize their cutting height for different grass types and seasonal conditions.

The mower also incorporates efficient technologies that enhance the mowing experience. One such technology is the automatic choke, which simplifies starting the engine. This user-friendly feature minimizes the need for manual adjustments, allowing for easier and faster starts, even after long periods of inactivity.

The Poulan PO14542B is designed with comfort in mind. It features a comfortable, ergonomic seat that provides support during extended mowing sessions. The steering system is also intuitive, allowing for smooth navigation around obstacles in the yard.

Safety is a crucial aspect of this mower, incorporating features such as an operator presence control that immediately shuts off the mower if the operator leaves the seat. This design enhances safety, providing peace of mind while operating the mower.

Maintenance is made easier with accessible components and a durable build that is resistant to wear and tear. The mower's compact design also allows for easy storage, making it an excellent choice for homeowners looking for efficiency and reliability in lawn care.

In summary, the Poulan PO14542B is a versatile lawn mower that delivers impressive power, user-centric features, and safety measures, making it a reliable companion for backyard maintenance. Its combination of performance, comfort, and ease of use makes it a valuable investment for any homeowner aiming to achieve a well-groomed lawn.
Top Page Image Contents