SERVICE AND ADJUSTMENTS

Loosen adjustment bolt in front of the right rear wheel.

Position the gear shift lever in the neutral (N) posi- tion.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

NEUTRAL

LOCK GATE

GEARSHIFT LEVER

ADJUSTMENT

BOLT

FIG. 21

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 22)

TO START ENGINE WITH A WEAK BATTERY (See Fig. 23)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

• Block up axle securely.

• Remove axle cover, retaining ring and washers to allow

wheel removal (rear wheel contains a square key - Do

not lose).

• Repair tire and reassemble.

• On rear wheels only: align grooves in rear wheel hub

and axle. Insert square key.

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

Replace washers and snap retaining ring securely in

 

axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 22

21

FIG. 23

REPLACING BATTERY (See Figs. 24 and 25)

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acci- dental grounding.

Lift seat pan to raised position.

Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

Install new battery with terminals in same position as old battery.

Page 21
Image 21
Poulan PO17542STB manual To Adjust Steering Wheel ALIGN- Ment, Front Wheel TOE-IN/CAMBER, Replacing Battery See Figs

PO17542STB specifications

The Poulan PO17542STB is a versatile and powerful lawn tractor designed for homeowners seeking an efficient solution for their mowing needs. With its robust engine and advanced features, this model stands out in the realm of residential lawn care, ensuring a beautifully manicured lawn with minimal effort.

One of the key features of the PO17542STB is its 17.5 horsepower engine. The engine is a vital component that provides sufficient power to tackle any grass type and terrain. This powerful engine is paired with a durable 42-inch cutting deck, which allows the tractor to cover a significant area in one pass, reducing mowing time.

The cutting height of the Poulan PO17542STB is easily adjustable, offering seven different positions. This feature allows users to customize their mowing height, ensuring that the grass is cut to the desired length for a neat appearance. The cutting deck itself is designed with a rugged steel construction, enhancing durability and longevity while providing a clean and even cut.

A significant technological advantage of the PO17542STB is its automatic transmission system. This feature eliminates the need for manual gear shifting, allowing for a smoother and more comfortable driving experience. The hydrostatic drive system provides seamless speed control, enabling the operator to navigate effortlessly across varying terrains.

Comfort is a priority in the design of the PO17542STB. It features a soft-grip steering wheel and a cushioned seat, reducing fatigue during extended use. The ergonomic design ensures that controls are easily accessible, promoting a user-friendly experience. Additionally, the tractor's compact size makes it easy to maneuver in tighter spaces and around obstacles in the yard.

The Poulan PO17542STB also includes practical features like a rear grass collection bag, which simplifies waste management while mowing. This feature allows for easy disposal of grass clippings, keeping your lawn tidy and promoting healthy grass growth.

In summary, the Poulan PO17542STB is a powerful and user-friendly lawn tractor ideal for homeowners looking for efficiency and ease in lawn maintenance. With its strong engine, adjustable cutting heights, hydrostatic transmission, and comfortable design, it promises to deliver an outstanding mowing experience. Whether you have a small or medium-sized yard, the PO17542STB is a reliable choice to achieve a well-groomed lawn without the hassle.