TROUBLESHOOTING - See appropriate section in manual unless directed to an authorized Service Center.

PROBLEM

 

CAUSE

CORRECTION

Loss of power

1.

Rear of lawn mower

1.

Raise cutting height.

 

 

housing or cutting blade

 

 

 

 

dragging in heavy grass.

 

 

 

2.

Cutting too much grass.

2.

Raise cutting height.

 

3.

Dirty air filter.

3.

Clean/replace air filter.

 

4.

Buildup of grass, leaves,

4.

Clean underside of mower

 

 

and trash under mower.

 

housing.

 

5.

Too much oil in engine.

5.

Check oil level.

 

6.

Walking speed too fast.

6.

Cut at slower walking speed.

 

 

 

 

 

Poor cut –

1.

Worn, bent or loose blade.

1.

Replace blade. Tighten

uneven

 

 

 

blade bolt.

 

2.

Wheel heights uneven.

2.

Set all wheels at same

 

 

 

 

height.

 

3.

Buildup of grass, leaves

3.

Clean underside of

 

 

and trash under mower.

 

mower housing.

 

 

 

 

 

Excessive

1.

Worn, bent or loose blade.

1.

Replace blade. Tighten

vibration

 

 

 

blade bolt.

 

2.

Bent engine crankshaft.

2.

Contact a qualified service

 

 

 

 

center.

 

 

 

 

 

Starter rope

1.

Engine flywheel brake is on

1.

Depress control bar to

hard to pull

 

when control bar is released.

 

upper handle before

 

 

 

 

pulling starter rope.

 

2.

Bent engine crankshaft.

2.

Contact a qualified service

 

 

 

 

center.

 

3.

Blade adapter broken.

3.

Replace blade adapter.

 

4.

Blade dragging in grass.

4.

Move lawn mower to cut

 

 

 

 

grass or to hard surface.

 

 

 

 

 

Grass catcher

1.

Cutting height too low.

1.

Raise cutting height.

not filling

2.

Lift on blade worn off.

2.

Replace blade.

(If so equipped)

3.

Catcher not venting air.

3.

Clean grass catcher.

 

 

 

 

 

Hard to push

1.

Grass is too high or wheel

1.

Raise cutting height.

 

 

height is too low.

 

 

 

2.

Rear of lawn mower

2.

Raise rear of lawn mower

 

 

housing or cutting blade

 

housing one (1) setting

 

 

dragging in grass.

 

higher.

 

3.

Grass catcher too full.

3.

Empty grass catcher.

 

4.

Handle height position not

4.

Adjust handle height to suit.

 

 

right for you.

 

 

 

 

 

 

 

DELUXE PUSH ROTARY

LAWN MOWER

WARNING: This lawn mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest authorized service center.

193732 Rev. 3 03.26.07 BY

Printed in U.S.A.

Page 1 Page 2
Page 1
Image 1
Poulan 961320035, PO500N21RH3 manual Problem Cause Correction
Page 1 Page 2

PO500N21RH3, 961320035 specifications

The Poulan 961320035, also known as the PO500N21RH3, is a high-performance snow blower designed to tackle tough winter conditions with ease. This robust machine is engineered for homeowners seeking a reliable solution for clearing snow from driveways and pathways, offering both power and convenience.

One of the primary features of the PO500N21RH3 is its powerful engine. Equipped with a reliable and efficient engine, it ensures optimal performance even in heavy snow conditions. The 24-inch clearing width allows users to clear large areas quickly, while the 21-inch intake height makes it ideal for handling substantial snowfalls effectively.

The snow blower also boasts an innovative auger and impeller system that enhances its snow clearing capabilities. The heavy-duty steel auger cuts through packed snow and ice, efficiently breaking it up for easy removal. The impeller then throws the snow up to 35 feet away, preventing any unwanted backflow and enabling users to clear their paths efficiently.

The PO500N21RH3 is equipped with all-wheel drive technology, providing superior traction and control on slippery surfaces. This feature allows for easy maneuverability, ensuring the snow blower remains stable and effective on various terrains. Additionally, the adjustable skid shoes help protect surfaces while accommodating different clearing heights.

Another notable characteristic is the ergonomic design, featuring an adjustable handle that enhances comfort during operation. Users can easily adjust the height of the handle to suit their preferences, reducing strain during extended use. The electric start feature simplifies the starting process, allowing users to quickly get to work without the hassle of manual starting.

Safety features are also incorporated into the design of the PO500N21RH3. It includes a safety switch that ensures the equipment cannot accidentally start, promoting safe operation. Furthermore, its compact design allows for easy storage when not in use, making it convenient for homeowners with limited storage space.

In terms of maintenance, the Poulan snow blower is designed for ease of service, allowing users to perform routine checks and repairs without any hassle. Overall, the Poulan 961320035 (PO500N21RH3) combines power, efficiency, and user-friendly features, making it an excellent choice for winter snow management. Whether facing light flurries or heavy snowfalls, this snow blower is engineered to get the job done effectively.
Top Page Image Contents