Clutch Cover

Bar Knob

Location of shipping spacer

4.Slide guide bar on bar bolts until guide bar stops against clutch drum sprocket.

Guide bar

Bar bolts

5.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

6.Place chain over and behind clutch re- tainer, fitting the drive links in the clutch drum sprocket.

7.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

8.Fit chain drive links into bar groove.

9.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

10.Install clutch cover. Be sure adjusting pin is in the adjusting pin hole in the guide bar.

CAUTION: It is very important when instal- ling the clutch cover that the adjusting pin aligns into the adjusting pin hole in the bar. Fail- ure to install the clutch cover correctly may re- sult in permanent damage to your chain saw.

Back view of clutch cover

Adjusting pin

11.Install bar knob and finger tighten only. Once the chain is tensioned, you will need to tighten bar knob.

CHAIN TENSION (Including units with chain already installed)

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

NOTE: When adjusting chain tension, make sure the bar knob is finger tight only. Attempting to tension the chain when the bar knob is tight can cause damage.

Checking the tension:

Use a screwdriver to move chain around guide bar. If the chain does not rotate, it is too tight. If the chain is too loose, it will sag below the bar.

Guide

Bar

Adjusting Bar Screwdriver

Wheel Knob

Adjusting the tension:

Chain tension is very important. Chains stretch during use. This is especially true during the first few times you use your saw. Always check chain tension each time before you start the chain saw.

1.Lift lever on bar knob and turn counter- clockwise 1 turn to loosen bar clamp.

LOOSEN

2.Turn adjusting wheel (downward direc- tion) to tension chain until chain solidly contacts bottom of guide bar rail. Lift tip of guide bar while adjusting tension.

7

Page 6 Page 8
Page 7
Image 7
Poulan PP3516AVX instruction manual Adjusting the tension, Cutters
Page 6 Page 8

PP3516AVX specifications

The Poulan PP3516AVX is a powerful and efficient chainsaw designed to cater to both novice and experienced users. Known for its versatile features and robust design, this chainsaw is ideal for a range of tasks, from light pruning to heavy-duty cutting, making it a reliable tool for homeowners and professionals alike.

One of the standout features of the Poulan PP3516AVX is its 35cc two-cycle engine. This engine delivers ample power, enabling users to tackle a variety of jobs with ease. The lightweight design, combined with an ergonomic handle, ensures that users can operate the chainsaw comfortably for extended periods without experiencing fatigue. The chainsaw’s 16-inch bar and chain strike a perfect balance between reach and control, making it suitable for cutting through branches, logs, and other materials effectively.

The technology integrated into the Poulan PP3516AVX enhances its performance and user experience. The chainsaw is equipped with the OxyPower engine, which provides more power while reducing emissions. This eco-friendly feature is not only better for the environment but also improves fuel efficiency, allowing users to work longer between refueling. Additionally, the air filtration system keeps the engine clean, prolonging its life and reducing maintenance needs.

The tool-less chain tensioning system is another significant advantage of the PP3516AVX. This feature allows users to adjust the chain tension easily, ensuring optimal performance and safety without needing extra tools. The easy-access fuel and oil caps simplify the refueling process, minimizing downtime during work sessions.

Safety is a critical aspect of any chainsaw, and the Poulan PP3516AVX is designed with this in mind. It includes a chain brake that stops the chain immediately in case of kickback, providing added protection for users. The integrated hand guard also shields the hands from debris, enhancing safety while operating the chainsaw.

In summary, the Poulan PP3516AVX is a versatile and user-friendly chainsaw, perfect for a variety of cutting tasks. With its powerful engine, innovative technologies, and safety features, it stands out as a reliable choice for anyone looking to take on outdoor projects with confidence. Whether for light maintenance or larger scale jobs, the PP3516AVX delivers performance and convenience in one efficient package.
Top Page Image Contents