Trimmer Line Advance, Cutting Methods | Poulan PPB200 instruction

Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

To stop engine:

SRelease the throttle trigger.

SMove the ON/OFF switch to the OFF posi- tion.

TRIMMER LINE ADVANCE

The trimmer line will advance approximately 2 inches (5 cm) each time the bottom of the trimmer head is tapped on the ground with the engine running at full throttle.

The most efficient line length is the maximum length allowed by the line limiter. Always keep the shield in place when the tool is being oper- ated.

To advance line:

SOperate the engine at full throttle.

SHold the trimmer head parallel to and above the grassy area.

STap the bottom of the trimmer head lightly on the ground one time. Approximately 2 inches (5 cm) of line will be advanced with each tap.

Always tap the trimmer head on a grassy area. Tapping on surfaces such as concrete or as- phalt can cause excessive wear to the trimmer head.If the line is worn down to 2 inches (5 cm) or less, more than one tap will be required to ob- tain the most efficient line length.

WARNING: Use only 0.080″ (2 mm) diameter line. Other sizes of line will not ad- vance properly and can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause serious injury.

CUTTING METHODS

WARNING: Use minimum speed and do not crowd the line when cutting around hard objects (rock, gravel, fence posts, etc.), which can damage the trimmer head, become entangled in the line, or be thrown causing a serious hazard.

SThe tip of the line does the cutting. You will achieve the best performance and mini- mum line wear by not crowding the line into the cutting area. The right and wrong ways are shown below.

Tip of the line	Line crowded into
does the cutting.	work area.

RightWrong

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can wrap such as small posts, trees or fence wire.

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique removes unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique in- creases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

PPB200 specifications

The Poulan PPB200 is a highly efficient and versatile leaf blower that has gained popularity among homeowners and landscaping professionals alike. Known for its reliable performance and user-friendly design, the PPB200 is engineered to make yard maintenance a breeze.

One of the standout features of the Poulan PPB200 is its powerful 25cc two-cycle engine. This engine delivers a robust airflow speed of up to 200 miles per hour, enabling users to tackle both light and heavy debris removal with ease. Whether you're clearing leaves, grass clippings, or twigs, the PPB200's impressive power makes it an effective tool for keeping your outdoor space tidy.

The PPB200 also boasts a lightweight design, weighing in at just around 13 pounds. This makes it easy to handle, even during extended periods of use. The ergonomic design includes a padded handle and a throttle control that allows for comfortable operation, reducing fatigue and providing users with better control over the blower's power and speed. The backpack design also distributes the weight evenly, allowing for prolonged use without discomfort.

To enhance its performance, the Poulan PPB200 is equipped with an air purge primer bulb, which helps eliminate air from the fuel system and facilitates easier starting. The easy-start technology integrated into the engine ensures a hassle-free ignition, minimizing the time spent trying to get the blower up and running.

Another key feature is its innovative fan design, which maximizes airflow and amplifies suction power. This design not only helps in efficiently moving debris but also reduces noise levels during operation, making it a more pleasant experience for users and neighbors alike.

The Poulan PPB200 offers multiple nozzle attachments, allowing users to switch between different tasks easily. This adds to its versatility, making it suitable for various applications, including sweeping hard surfaces and blowing debris from hard-to-reach areas.

In summary, the Poulan PPB200 is a reliable and efficient leaf blower that combines power, comfort, and ease of use. With its formidable engine, lightweight structure, and convenient features, it is an ideal choice for anyone looking to maintain their yard effectively while saving time and effort. Whether you're a seasoned landscaper or a homeowner, the PPB200 is equipped to meet your outdoor cleanup needs with efficiency and style.

Poulan PPB200 Trimmer Line Advance, Cutting Methods, Tip of the line, Does the cutting Work area

Models: PPB200