SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT (See Fig. 23)

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

Make sure transaxle is in neutral (N).

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

Loosen adjustment bolt in front of the right rear wheel.

Position the gear shift lever in the neutral (N) position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

GEARSHIFT LEVER

NEUTRAL

LOCK GATE

 

 

ADJUSTMENT

 

BOLT

FIG. 23

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe- in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 24)

WASHERS

RETAINING

RING

AXLE

COVER

SQUARE KEY

(REAR WHEEL ONLY)

FIG. 24

TO START ENGINE WITH A WEAK BATTERY (See Fig. 25)

WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Customer Responsi- bilities section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

FIG. 25

21

Page 21
Image 21
Poulan PR17542STC owner manual Transaxle Gear Shift Lever Neutral Adjustment See Fig, To Adjust Steering Wheel Alignment

PR17542STC specifications

The Poulan PR17542STC is a robust and efficient riding lawn mower designed to provide superior lawn care for homeowners with medium to large-sized yards. Known for its durability and performance, this model combines modern technology with user-friendly features, making it an excellent choice for both novice and experienced gardeners.

One of the standout characteristics of the PR17542STC is its powerful 17.5 HP Briggs & Stratton engine. This reliable engine ensures ample power to tackle various lawn types and terrains, providing a smooth and consistent mowing experience. Its automatic transmission allows for easy maneuverability, enabling the user to change speeds without the hassle of shifting gears manually. This feature is particularly beneficial when navigating around obstacles and tight corners.

The mower features a 42-inch cutting deck, which is optimal for achieving a clean and even cut across your lawn. The cutting deck comes equipped with three separate blades, allowing for efficient grass distribution and reducing the need for extensive clean-up afterward. Additionally, the cutting height can be easily adjusted to meet the specific needs of your lawn, offering a customizable mowing experience.

Comfort is prioritized in the design of the PR17542STC, as illustrated by its cushioned seat and ergonomic steering wheel. This ensures that users can enjoy longer mowing sessions without discomfort. The mower also includes a convenient dashboard that displays essential information, such as fuel levels and speed, keeping the user informed at all times.

Technologically advanced features such as a mulching kit are available, allowing homeowners to recycle grass clippings into nutrient-rich mulch. This not only promotes a healthier lawn but also helps reduce waste. Furthermore, the mower’s easy-to-access maintenance points make routine upkeep simple and straightforward, ensuring it remains in excellent condition for many seasons.

Overall, the Poulan PR17542STC stands out as a reliable and efficient riding lawn mower, thanks to its powerful engine, user-friendly features, and advanced technology. Whether you're maintaining a pristine lawn or managing challenging terrain, this mower offers the performance and comfort necessary to achieve your gardening goals, making it a valuable addition to any homeowner's lawn maintenance arsenal.