OPERATION

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 7)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a flat level surface.

Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8-16 locknut and tighten securely.

Repeat for opposite side installing gauge wheel in same adjustment hole.

3/8-16

LOCKNUT

GUAGE WHEEL

MOUNTING

BRACKET

3/8 WASHER

SHOULDER

GAUGE WHEEL

BOLT

 

FIG. 7

TO OPERATE MOWER (See Fig. 8)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

Select desired height of cut.

Lower mower with attachment lift control.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT LIFT LEVER HIGH POSITION

ATTACHMENT

 

CLUTCH LEVER

LOW

"DISENGAGED"

POSITION

POSITION

 

DEFLECTOR

SHIELD

FIG. 8

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

To restart movement, slowly release parking brake and clutch/brake pedal.

Slowly move motion control lever to slowest setting.

Make all turns slowly.

TO TRANSPORT (See Figs. 5 and 9)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

Raise attachment lift to highest position with attach- ment lift control.

Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

Do not push or tow tractor at more than two (2) MPH.

To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

12

Page 12
Image 12
Poulan PR185H42STE To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, To Operate on Hills, To Transport See Figs

PR185H42STE specifications

The Poulan PR185H42STE is a versatile riding mower designed to make lawn care effortless for homeowners. With a powerful engine and user-friendly features, this mower stands out as a reliable choice for managing larger lawns and properties.

One of the key features of the PR185H42STE is its robust 18.5 horsepower Briggs & Stratton engine. This engine provides the necessary power to tackle thick grass and uneven terrain with ease. The mower's engine is designed for easy starting and smooth operation, ensuring that users can get to work quickly without the frustration of difficult startups.

The PR185H42STE comes equipped with a 42-inch cutting deck, which enables users to cover more ground in less time. This mid-sized deck is ideal for navigating through tight spaces while still being large enough to handle larger areas efficiently. The cutting height can be easily adjusted to suit different grass types and cutting preferences, offering versatility for varied mowing conditions.

Another standout feature of this mower is its hydrostatic transmission, which provides seamless speed changes without the need for gear shifting. This allows for a smoother ride and easier control when maneuvering around obstacles or adjusting speed on slopes. The steering wheel is designed for comfort, providing users with a pleasant experience during those longer mowing sessions.

The Poulan PR185H42STE also emphasizes user comfort and safety. With a padded seat and armrests, operators can enjoy a more relaxed mowing experience. Additionally, safety features such as an automatic blade stop when the operator leaves the seat ensure safety while maintaining productivity.

To enhance efficiency, the mower is equipped with a mulching option. This feature allows users to finely chop grass clippings and return them to the lawn, which can improve soil health and promote a lush, green appearance. The mower's bagging capability also adds to its versatility, making it easy to collect clippings for disposal or composting.

Finally, consumer-friendly aspects like easy access to routine maintenance points ensure that upkeep is simple and straightforward. The Poulan PR185H42STE combines power, convenience, and comfort, making it an excellent choice for those seeking a reliable riding mower for their lawn care needs. Whether tackling routine maintenance or preparing for the growing season, this mower proves to be an indispensable gardening tool.