OPERATION

8.Press in and turn the ignition key to the start position.

8011-7422

Turn to the start position

9.When the engine starts, immediately release the ignition key back to the run position.

IMPORTANT INFORMATION

Do not run the starter for more than

5 seconds each time. If the engine does not start, wait about 10 seconds before re-trying.

10.Set the desired engine speed with the throttle.

Allow the engine to run at a moderate speed, ”half throttle”, for 3-5 minutes before loading it too heavily.

USE FULL THROTTLE WHEN MOWING (no choke).

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is an odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

8011-7432

Return to run position

8011-7542

Set the engine speed

English-27

Page 29
Image 29
Poulan Pro 900 ZX manual Press in and turn the ignition key to the start position