Poulan QCT342, 960 72 00-07, 402337 owner manual UPPER CHUTE See Figs. 6A & 6B, Level Mower

Models: 402337 960 72 00-07 QCT342

1 13

Page 9

1.Lower mower to its lowest cutting position.

2.Assemble upper chute by inserting curved end into hole in back of cover.

NOTE: Handle carefully so as not to damage full bagger indicator.

3.Push in and turn upper chute until it is in line with lower chute.

4.Align the bosses on lower chute with alignment slots on upper chute and slide together.

5.Secure with rubber latch by hooking hole in latch over latch pin.

LOWER

CHUTE

03029

ALIGNMENT

SLOT

LATCH PIN

03023	RUBBER
	LATCH

BOSSES

•Be sure mower is properly leveled for best mower performance. See your tractors owner's manual for instructions

Image 9

Contents

Assembly Operation Customer Responsibilities Repair PartsProduct No. 960 72 42 Inch Mower Grass Catcher Safe Operation Practices for Ride-OnMowers SAFETY RULESI. GENERAL OPERATION II. SLOPE OPERATIONV. SERVICE TABLE OF CONTENTSIV. TOWING SAFETY RULESTOOLS REQUIRED FOR ASSEMBLY CARTON CONTENTSKNOW YOUR GRASS CATCHER UNPACKING INSTRUCTIONS1 BAGGER SUPPORT ASSEMBLY ASSEMBLYDRAWBAR A See Figs. 1A, 1B & 1C DRAWBAR B See Fig. 1DSUPPORT ASSEMBLY See Fig 3 CONTAINER ASSEMBLY See FigMOUNTING COVER ASSEMBLY TO 4 CONTAINER MOUNTING See Fig MOUNTING TAB See Fig. 5ALOWER CHUTE - MOWER WITH LOWER CHUTE - MOWER WITHOUT MOUNTING TAB See Fig. 5B7 LEVEL MOWER 6 UPPER CHUTE See Figs. 6A & 6BFIG. 6A FIG. 6BTIPS FOR IMPROVED BAGGING OPERATION OPERATIONBLADE CARE CUSTOMER RESPONSIBILITIESGENERAL RECOMMENDATIONS STORAGEREPAIR PARTS/PIÈCES DE RECHANGE PART REPAIR PARTS/PIÈCES DE RECHANGE