SAFETY RULES

Safe Operation Practices for Ride-On Mowers

IV. TOWING

Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

Follow the manufacturer's recommendation for weight limits for towed equipment and towing on slopes.

Never allow children or others in or on towed equip- ment.

On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

Travel slowly and allow extra distance to stop.

V. SERVICE

SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely fl ammable and the vapors are explosive.

Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

Use only approved gasoline container.

Never remove gas cap or add fuel with the engine run- ning. Allow engine to cool before refueling.

Never fuel the machine indoors.

Never store the machine or fuel container where there is an open fl ame, spark, or pilot light such as on a water heater or other appliances.

Never fi ll containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when fi lling.

Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

If fuel is spilled on clothing, change clothing immedi- ately.

Never overfi ll fuel tank. Replace gas cap and tighten securely.

GENERAL SERVICE

Never operate machine in a closed are.

Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel- soaked debris. Allow machine to cool before storing.

If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting.

Never make any adjustments or repairs with the engine running.

Check grass catcher components and the discharge guard frequently and replace with manufacturer's rec- ommended parts, when necessary.

Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

Maintain or replace safety and instruction labels, as necessary.

Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while back- ing.

Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation.Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator.

Be alert and turn machine off if a child enters the area.

Before and while backing, look behind and down for small children.

Mow up and down slopes (15° Max), not across.

Be alert and turn machine off if a child enters the area.

Choose a low ground speed so that you will not have to stop or shift while on the slope.

Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

If machine stops while going uphill, disengage blades, shift into reverse and back down slowly.

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

CONGRATULATIONS on your purchase of a new Grass Catcher. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problems you cannot easily remedy, please contact your nearest authorized service center/ department. They have competent, well trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual.The instructions will enable you to assemble and maintain your Grass Catcher properly. Always observe the "SAFETY RULES".

TABLE OF CONTENTS

SAFETY RULES

2-3

CUSTOMER RESPONSIBILITIES

......................................... 11

ASSEMBLY

5-9

STORAGE

11

OPERATION

10

3 REPAIR PARTS

Center of Manual

Page 3
Image 3
Poulan QCT42, 402338, 960 72 00-06 owner manual Table of Contents

960 72 00-06, 402338, QCT42 specifications

The Poulan 402338,960 72 00-06,QCT42 is a powerful and versatile tool designed for both amateur and professional users looking for efficient yard maintenance solutions. This exceptional piece of equipment combines rugged durability with advanced technology to provide outstanding performance in various landscaping tasks.

One of the main features of the Poulan QCT42 is its robust engine. With a powerful 42cc two-stroke engine, the tool delivers ample power for cutting through tough grass and weeds, making it an ideal choice for heavy-duty applications. This robust engine is paired with a reliable starter that ensures quick and easy firing up of the tool, saving users valuable time during their outdoor projects.

The design of the Poulan 402338 promotes user comfort and ease of use. It features an ergonomic handle that allows for a firm grip, reducing fatigue during extended periods of operation. The lightweight structure further enhances maneuverability, making it easy to navigate around obstacles in gardens and yards. Additionally, the balanced weight distribution of the tool offers superior control and stability when cutting.

In terms of safety, the Poulan QCT42 is equipped with advanced safety features, including a protective cover that prevents debris from flying back at the user while operating. This ensures a safer working environment, especially in overgrown areas where visibility may be limited.

The Poulan 402338 is also designed for versatility. It comes with interchangeable attachments that allow users to easily switch between various gardening tasks, such as trimming, edging, and even cultivating. This adaptability makes it a valuable addition to any garden tool collection, eliminating the need for multiple devices.

Maintenance of the Poulan QCT42 is straightforward and hassle-free. The tool is equipped with easily accessible components, making routine maintenance tasks quick and efficient. The durable construction ensures longevity and reliable performance, even under rigorous conditions.

Overall, the Poulan 402338,960 72 00-06,QCT42 stands out with its powerful engine, ergonomic design, safety features, and versatility. This tool is an excellent choice for those seeking to maintain a pristine garden or yard with ease and efficiency. Its combination of power and innovative features solidifies its status as a dependable tool for landscaping enthusiasts and professionals alike.