Operation

4.Insert two screws into the screw holes.

5.Secure shoulder strap clamp by tighten- ing screws with a hex wrench.

ADJUSTING THE ASSIST HANDLE

WARNING: When adjusting the as- sist handle, be sure it remains between the

coupler and the lower arrow (closest to coupler) on the safety label to ensure proper

balancing of unit. When adjusting the assist handle or handlebar during use of optional at- tachments, it must be repositioned between

the throttle trigger and the upper arrow (closest to engine) on the safety label.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an up- right position; retighten wing nut.

KNOW YOUR PRUNER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Pruner

Assist Handle Coupler

ON/OFF Switch

Shaft

Attachment Hanger

Bar oil fill cap

Chain

Bar	Bar nut

ON/OFF SWITCH

The ON/OFF switch is located on the trigger handle and is used to stop the engine. Move the switch to the OFF position to stop the engine.

PRIMER BULB

The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.

START LEVER

The START LEVER helps to supply fuel to the engine to aid in starting. Activate the starting

Shoulder strap clamp

Starter handle Fuel mix fill cap

Primer bulb

Throttle trigger

Start lever	Muffler

system by moving the start lever to the START position. DO NOT squeeze the throttle trigger until the engine has started and runs. After the engine starts, allow the engine to warm--up 5 seconds, then fully squeeze the throttle trigger to deactivate the starting system.

COUPLER

The COUPLER enables optional attach- ments to be installed on the unit.

CHAIN TENSION

It is normal for a new chain to stretch during first 15 minutes of operation. You should check your chain tension frequently. See CHAIN TENSION in the SERVICE AND AD- JUSTMENTS section.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is

SM446E specifications

The Poulan SM446E is a powerful and efficient lawn mower designed to meet the demands of both residential and professional users. With its robust 46cc engine, this mower delivers excellent performance and reliability, making it an ideal choice for maintaining small to medium-sized lawns.

One of the standout features of the Poulan SM446E is its 22-inch cutting deck. This size strikes a balance between maneuverability and coverage, allowing users to easily navigate around obstacles while also covering a significant area in a single pass. The deck is designed with durable materials, ensuring it can withstand the rigors of regular use while providing a clean and even cut.

Equipped with a push start system, the SM446E offers user-friendly operation. This feature eliminates the frustration often associated with traditional pull-start mowers, making it easier for users of all skill levels to get started quickly and efficiently. Additionally, the mower includes an adjustable cutting height lever, allowing users to customize the height of their grass cut for different seasons and personal preferences.

The Poulan SM446E also incorporates advanced technologies, such as a high-performance air filtration system. This system helps maintain engine efficiency and longevity by preventing debris from entering the engine, ensuring optimal performance even in harsh conditions. The mower is also designed with an ergonomic handle, providing comfort during extended use and reducing user fatigue.

Another significant characteristic of the SM446E is its lightweight design. Weighing in at only 88 pounds, it allows for easy handling and transport. This feature is particularly beneficial for users who may need to lift or move the mower frequently.

In summary, the Poulan SM446E is a well-rounded lawn mower that combines power, efficiency, and user-friendly features. With its reliable engine, durable construction, and ergonomic design, it stands out as a top choice for anyone seeking a dependable solution for their lawn care needs. Whether you are a homeowner or a professional landscaper, the Poulan SM446E is built to provide excellent results with minimal effort.

Poulan SM446E instruction manual Operation

Models: SM446E