Shoulder Strap Assembly

3.Secure the mounting bracket by tighten- ing the screws with the hex wrench.

4.Locate the decal on the handlebar. This decal includes an arrow. Position the handlebar with the mounting bracket at the end of the arrow.

5.Position the second bracket cover over the handlebar. Align the mounting brack- et and the bracket cover screw holes. Again make sure the handlebar is at the end of the arrow.

6.Insert two screws and hand tighten only. Be sure the handlebar is installed cor- rectly; then, tighten each screw securely with the hex wrench.

WARNING: Proper shoulder strap and handlebar adjustments must be made with the engine completely stopped before us- ing unit. The shoulder strap clamp must be installed as shown above the handlebar on the upper shaft (powerhead end of unit).

NOTE: The lower shoulder strap clamp has two spacer tabs attached. These tabs are pro- vided to adapt this attachment for use with powerheads that have a 1″ (2.5 cm) diameter upper shaft (the shoulder strap clamp will not tighten down securely on the 1″ (2.5 cm) diam- eter upper shaft without using these spacer tabs). The tabs must be broken off completely before use and placed over the screw holes on the lower shoulder strap clamp. These tabs are not needed for powerheads with a 7/8″ (2.2 cm) upper shaft.

LOWER SHOULDER STRAP CLAMP

Spacer Tabs

Upper Shoulder

Strap Clamp

POWERHEAD

END

	Lower Shoulder	ATTACHMENT
		END
	Strap Clamp
		Screws

3.Insert two screws into the screw holes.

4.Secure shoulder strap clamp by tighten- ing screws with the hex wrench.

5.Insert your right arm and head through the shoulder strap and allow it to rest on your left shoulder. Make sure the danger sign is on your back and the hook is to the

right side of your waist.

NOTE: A one-half twist is built in the shoulder strap to allow the strap to rest flat on the shoul- der.

6.Adjust the strap, allowing the hook to be about 6 inches below the waist.

7.Fasten the strap hook to the clamp and lift the tool to the operating position.

8.Try on shoulder strap and adjust for fit and balance before starting the engine or

beginning a cutting operation.

NOTE: It may be necessary to relocate the shoulder strap clamp on the shaft for proper balancing of unit.

HARNESS

ADJUSTMENT

FOR BALANCE

Spacer Tabs positioned for use on 1″ (2.5 cm) diameter upper shaft

1.Place the upper shoulder strap clamp over the upper shaft above the handlebar.

2.Position the lower shoulder strap clamp under the upper shaft and align the upper and lower clamp screw holes (use spacer tabs between upper and lower clamps if necessary to secure clamp, i.e. for 1″ (2.5 cm) diameter upper shaft).

6inches (15 cm) below waist

	4 -- 12
		inches
	(10 -- 30 cm)
30 inches		above
30 inches		ground
(76 cm)		ground
(76 cm)

30inches

(76 cm)

U4000C specifications

The Poulan U4000C is a reliable and robust chainsaw designed to meet the needs of both novice and seasoned users. Known for balancing power and ease of use, the U4000C is an ideal choice for homeowners and professionals alike who require a dependable tool for various cutting tasks.

One of the standout features of the Poulan U4000C is its powerful 40cc two-cycle engine. This engine delivers impressive performance, allowing users to tackle tough cutting jobs without excessive strain. The engine is designed to ensure maximum efficiency while minimizing fuel consumption, making it an environmentally friendly option for chainsaw users.

Another noteworthy aspect of the U4000C is its lightweight design. Weighing in at just under 10 pounds, this chainsaw is easy to handle, reducing user fatigue during prolonged use. Its ergonomic design incorporates a comfortable grip, which enhances control and maneuverability, especially in tricky cutting scenarios. The balanced weight distribution further contributes to its ease of use, providing a more comfortable cutting experience.

The Poulan U4000C is equipped with a 16-inch bar and chain. This length strikes an ideal balance for a variety of projects, ranging from light trimming to more demanding cutting tasks. The chain itself is engineered for sharpness and long-lasting performance, ensuring that users can make precise cuts with minimal effort.

For added convenience, the U4000C features an effortless starting system. The advanced starting technology reduces the amount of pull required to start the engine, making it particularly user-friendly for those who may struggle with traditional chainsaw starting methods. Additionally, the chainsaw includes an automatic oiler, which helps maintain optimal chain lubrication during operation, enhancing the longevity of both the chain and bar.

Safety is a crucial concern for any power tool, and the Poulan U4000C does not disappoint in this regard. It integrates safety features such as a protective handguard and a chain brake that activates in the event of kickback, providing users with peace of mind while operating the saw.

In summary, the Poulan U4000C stands out with its powerful engine, lightweight design, user-friendly features, and critical safety mechanisms. This versatile chainsaw caters to a wide range of cutting applications, making it an excellent choice for anyone looking for a reliable tool that combines performance and safety. Whether you’re preparing firewood, pruning trees, or tackling larger cutting tasks, the U4000C is equipped to get the job done efficiently and effectively.

Poulan U4000C instruction manual Shoulder Strap Assembly

Models: U4000C